bolt

Set of 15 for $135, or set of 13 (3FE with keeping smog pump bracket) for $117 +15 shipping US

On the front of my frame are 4 threaded bolt holes on each side - 2 above and 2 below - this is where the bumper mounts. The 2 on the bottom and the 1 on the top closer to the engine bay are the same thread and pitch. However, the top threaded bolt hole away from the bay is larger - Any idea...

I'm working on doing a full refresh on my suspension and steering bushings. Bought the Trail Tailor tools, Man-a-fre bushing kit, and tie rod ends from Cruiser Teq. Unfortunately I forgot that some hardware isn't reusable... Now I'm wondering how I ensure I get the correct hardware where...

Trying to source the standard bolt that secures the tailgate chains. This is for a HJ47 with a tub but others may be the same. Any leads on this? It is a bolt with an oversize shank and a 1/2 thickness head.

Does anybody know if all 4 bolts holes for the water pump are through holes into the coolant passage? The top driver side on mine snapped and need to know how to drill through before re-tapping.

Does the I-6 4200 Vortec have the same bell housing bolt pattern as the V-8 LS?

I looked over and over on PartsOuq but couldn't find this bolt. I need one of the bolts that mount seats to the body. I believe it's M8x1.25, but I prefer original. What is PN for it?

Hi guys! I've used the search engine with non answers. Does anyone know the bolt thread and size and nut thread for the OEM running boards / side steps? The ones that bolt to the body. I recently picked some OEM boards but I am missing the hardware to bolt on to the body. My dealers don't have...

What should be bolted to this threaded hole (red arrow)? Passenger side near starter.

Using a 69 Fj40 tub in my build. Recently making repairs I had a bolt(press in stud) fall out of the tubs channel that's behind the seats, where the floor steps up. Never seen it before, any thoughts on where/what it goes too?

Much to my surprise I saw this laying on the ground next to my '72 FJ40 when I walked out to the garage this morning - never a good thing to see. It is an M8x1.25 bolt. Now the search of where it came from begins. Might first thought is it has something to do with having recently installed...

Christmas Eve the LX470 left me stranded with the key spinning in the ignition, but no go. Visited the web for common problems and found this video. No problem…got the rig home via AAA, and opened it up. After 2.5 hours of digging out the old busted part, I had it clean. Ordered the new...

My 95 has a blown head gasket after flogging it to death pulling a box trailer for a month for work while searching for a new V8 Sequoia to replace the one my daughter totaled. I'm getting ready to replace the HG in the truck, and have a good spare engine (also with a minor HG leak) to mix/...

Was trying to fix the slow drip of water I had coming down from the prinsu roof rack mount on the driver's side front by the seat belt area and when I went to put the bolts back in, I noticed that the threads had fallen down. No amount of magnets or wiggling got them back up. Now I have tape and...

I have just noticed the bottom bolt will not budge as if spring loaded like the top bolt. Is that proper operation? Thanks.

There is a long bolt for the door hinges in a 1973 FJ40. Which is longer - top or bottom?

~4 weeks ago I had our LC lifted by pros with a Kings kit from Filthy motorsports, and had the installer use the Dr KDSS bracket to fix the rear panhard bar angle as part of the install. Spidertrax spacers were installed as well to prevent the front wheels from rubbing. The installer marked...

Looking for the ever elusive 3 bolt windshield latch hook, i need 2, thanks in advance

Looking for the ever elusive 3 bolt windshield latch hook as pictured below, need 2

Hey y'all, The cover to hold the sway bar bushing has fallen off. Sway bar makes a hell of a noise (bushing slides to the left on its own) when it hits the axle!! geeeeezus. Sound happened near home, so gonna take a walk and see if i can find it hahaha. Anyways, so i think i have found the...