- Thread starter
- #41
In this picture, 2 out of the 4 rear mounts across the bumper/rear frame rail are installed and bolted with the rubber body mount in place. I believe there needs to be a metal “stand off” bracket welded to the tub where your arrows are drawn. The one that is there is flat against the bottom of the tub. Where you drew the ️ I don’t believe it will hit. I just closed up the garage for the day. I’ll check it out in the morning. I did mount a new fender and it’s not even close to mating to the tub, so what you are saying about it needing to move forward may be correct.@brian @peesalot that’s the way mine are as shown (more or less). Looks like an overall length issue body mount-to-body mount. The firewall brace should sit just in front of the body mount/frame step support, looks like it’s resting on it.
@Papa Rich what happens if you set the tub in place with front body mounts sitting on (there will be a gap for the rubber body mount pad) the body mount support? Where do the aft body mounts fall wrt to their frame mount locations.
View attachment 3526533