blossett
SILVER Star
Got in a pair of Red Line defrost adapters. Drops the size to 2” for the Old Air hoses.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I like it!! I need to rebuild my heater and blower and noticed about a 1/2" gap between the intake and the body of the truck where I presume a foam gasket used to live. I was thinking it would be great to print an insert for that spot that has one side shaped to accept a tube from my on-board compressor so that it pulled cool air rather than hot air from under the hood.took a break from finding/cleaning/installing parts... created and printed a new 87294-60031 NET, AIR DUCT
View attachment 2962508
View attachment 2962509
View attachment 2962512
View attachment 2962514
@ToyotaMatt sells them. It is a plug, not a grommet.Anyone know of a part number or source for the fuel tank well grommet?
View attachment 2962584
I read a thread that had an OEM part number #90950-01901 that could be used for this application. So that is what I have in mine.Anyone know of a part number or source for the fuel tank well grommet?
View attachment 2962584
THIS IS JUST WHAT I NEED. Can you make 3 more?took a break from finding/cleaning/installing parts... created and printed a new 87294-60031 NET, AIR DUCT
View attachment 2962508
View attachment 2962509
View attachment 2962512
View attachment 2962514
Anyone know of a part number or source for the fuel tank well grommet?
View attachment 2962584
@ToyotaMatt sells them. It is a plug, not a grommet.
After using an OEM plug, I opted for a VW 40mm Plug #1K0-899-185. It was $2 for a breathable plug, allowing moisture out but not in.I read a thread that had an OEM part number #90950-01901 that could be used for this application. So that is what I have in mine.
I read a thread that had an OEM part number #90950-01901 that could be used for this application. So that is what I have in mine.
Welcome to the club!All this oil pressure talk made me watch my gage a lot closer today...I'm running just above the "first tick"...
Does your truck haveI like it!! I need to rebuild my heater and blower and noticed about a 1/2" gap between the intake and the body of the truck where I presume a foam gasket used to live. I was thinking it would be great to print an insert for that spot that has one side shaped to accept a tube from my on-board compressor so that it pulled cool air rather than hot air from under the hood.
Yes, pm me with an address.THIS IS JUST WHAT I NEED. Can you make 3 more?
Should be able to make a new port into the cab on the firewall… not sure if your ‘80 FJ40 has the cabin air connection to the distributor or not but could copy that installation. Here’s a pic off MUD… the breather is circled in blue.I like it!! I need to rebuild my heater and blower and noticed about a 1/2" gap between the intake and the body of the truck where I presume a foam gasket used to live. I was thinking it would be great to print an insert for that spot that has one side shaped to accept a tube from my on-board compressor so that it pulled cool air rather than hot air from under the hood.
Pics?Glued another character patch on my Paki soft top. It’s more patch than top these days. Gorilla glue and the patches sent with the top are the only things holding it together.