Finally got the wiring all done for the oe fog lights... thanks to @Coolerman for the wire harness and tips on install!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
In addition to My Tall early Temperature Sender Sensor Union i have recently
Reproduced ,
I have added 2 unique , and Period Correct Cylinder Head Coolant Heater Hose Bib Joints to my already Diverse Line up
i had The 24v and Diesel Folks In Mind as well at the same time on these 2
New ones , they are Heavy duty Zinc Plated Steel , i and Very Corrosion Resistant
View attachment 2239575View attachment 2239576View attachment 2239577
View attachment 2239578
View attachment 2239579
I looked everywhere for this this weekend, I'll be ordering some asap.
What's your site.
I looked everywhere for this this weekend, I'll be ordering some asap.
In addition to My Tall early Temperature Sender Sensor Union i have recently
Reproduced ,
I have added 2 unique , and Period Correct Cylinder Head Coolant Heater Hose Bib Joints to my already Diverse Line up
i had The 24v and Diesel Folks In Mind as well at the same time on these 2
New ones , they are Heavy duty Zinc Plated Steel , i and Very Corrosion Resistant
View attachment 2239575View attachment 2239576View attachment 2239577
View attachment 2239578
View attachment 2239579
What's your site.
Matt, looked at your site and didnt see one of the items posted. I need the black set on the right of your photos. Do you have those available
Matt, looked at your site and didnt see one of the items posted. I need the black set on the right of your photos 4/5. Do you have those available?
Josh
Finally got my winter project finished. Complete rebuild kits in tranny, transfer case, new clutch and rear main seal replaced. New oil pan (rusted through on spot welds where skids attached) and a few other minor fixes. Glad to have it back on the road.
Thanks to @cruiseroutfit for most of the parts!
Nice. I've been doing the same thing.OK...so I didn’t do anything to my Landcruiser but I did build a little workbench for the Iron Yak. I hope this qualifies. Yes it will have mixed uses. There is a gun cleaning kit stored below. And it does a great job of holding my beer. Peg board to follow.
View attachment 2257070