Other Vehicles

Classifieds: Jeep, Land Rover, Chevrolet, Ford, Dodge, Nissan, etc

Filter by prefix:

85 BJ70 diesel
hi miler 660 kms. came in with stripped out clutch spline. Good for rebuild or parts. Would need lots of TLC. Located in Summerland BC $1800 Also have BJ 60 diesel 5 sp to part out & rebuilt T-case for older FJ. Working on BJ42 diesel 204kms good mechanical still tub work to do - sell as is or will post ad when finished.
1991 Toyota Hiace Super Custom 4x4 2.8L non-turbo  $4,900
1991 Toyota Hiace Super Custom 4x4 2.8L non-turbo NEW PRICE $3,499 EDIT: 2012-09-27 -> NEW PRICE: $3,499 ------------------------------------New Price. $3,499 obo. Roof racks and 16" Alloy rims available. ------------------------------------Yes, this van is priced at nearly 1/2 to 2/3 of other Hiace vans in BC, but we bought the Toyota Sienna... and now I need to pay for it, so make an offer. :) 1991 Toyota Hiace SuperCustom 4x4 2.8L Diesel (non-turbo) Right-Hand-Drive (RHD). 8 Passenger Automatic Power locks Power doors Power curtains 2 sunroofs Tons of room Good tires Sony deck with 6-disc changer. Front & Rear climate control; AC needs recharge. Locking Hubs.[LIST] 1 owner since import to Canada...
1989 Toyota van 4x4
I'm selling my van unfortunately. This vehicle has been great for a bike hauler, a good tent for camping, and a good road tripper. The 4x4 works good. It has manual hubs and push button inside. It has cruise control but never made it work. It has no a/c from factory. The speedometer doesn't work, which can be fixed with a new cable which I did before and the cable I put in I quess was wore out and snapped I have been using just a garmin gps. Insides a lil wore out it has no back seat. The outsides in fair condition it has it's dings here and there. I sprayed rhino lining on the bottom cause I had fixed some dents down there and fiqured that rhino lining it would be cool. The rear bumper is custom it's a 4x4 square tubing...
What I have: https://www.dropbox.com/s/0rg64jb9m02ci64/haytruk-04.jpg 1949 Ford truck Z'd front and C notched rear four corner leaf springs solid front axel, moved forward for that gnarly hotrod stance low miles on reman 350 chevrolet V8 (runs awesome) Great compression, no smoke, lots of power aluminum eddelbrock dual plane intake 4bbl carb 700R4 overdrive auto transmission hooked to factory column shifter so it looks stock in the cab. Clutch pedal is there, but is just for looks. Transmission shifts and grabs great. It should actually get some great MPG for a v8 as light as the truck is and having that overdrive. Clear oregon title Antique plates that require no smog/tags. Ever. Battery and fuel tank mounted...
1982 Toyota 4x4 PU
All original, no trail useage, no accidents, garaged, perfect. Just over 100K miles. $8900 obo. This truck belongs to one of my best friends. He bought it in 1984 and I've known him longer than that. This Toy has been babied. I'm the contact person. NO TIRE KICKERS, EMAILS, OR BS'rs. Serious inquires only. Bruce 530-906-6450
1987 Toyota Landcruiser BJ73 series, FRP top 3B engine, 3.4L inline 4 eight valve OHV diesel engine, non turbo 90hp output Standard, Right hand drive 4WD with off road over axel lift Brand New Nitto Grappler Tires ($1300value): LT 265/75 R16 214 000km’s Beige exterior, grey interior Clean, sexy looking truck, in good repair, receipts for all work done Serious inquires only please.
2005 Tacoma double cab 4x4 $13,500 in NH
Truck has 142k on it. Indigo blue 4.0/auto TRD off road package. Has power windows, locks, keyless entry, factory alarm, rear locker, tow package, outdoor temp with compass, pretty much every option they offered besides the six disk changer. I bought it from a Toyota dealer about 2 years ago with 112k on it and it's been my winter DD and parts hauler ever since. I replaced both front wheel bearings when I first got it along with the fluids in the diffs and t-case. Just recently had a transmission service too. Oil changes every 5k since I got it with Toyota filters and 5W40 synthetic. It's a great truck and runs/drives as it should and everything works. I have a clean NH title in hand. It's a pretty clean rig for 142k miles but it does...
I am thinking about selling my 1974 40. I started the discussion in tech but decided I should have posted it here after the fact. so here is a link. https://forum.ih8mud.com/40-55-series-tech/625450-thinking-selling-price.html I worked at this rig for approx 7 years. I am like that, I tear down and repair/rebuild as necessary, it is a disease for me.:eek: I really enjoy this truck and it works flawlessly. I think I will build a turbo sytem for it the winter for something to do, I need to be doing something all the time as I hate being idle.:D I am looking at getting back into a Datsun Z car as it was the first car I owned and I had one for 17 years.:steer: So any advice on price or interestd parties I am interested in...
'97 4Runner, 5 Speed, eLocker, SEPA
hey guys. I currently have 3 3rd Gen 4Runners. This '97 was going to be another project but I already have a lifted 3rd and another project 3rd so... '97 SR5 3.4, 4x4, 5 Speed, e-Locker :D Anthracite Metallic (brownish color) Tan cloth Interior 195K miles Bought it after a flat bed rolled out of a garage without having the new brakes pumped up, rolled into the tailgate. Banged up the tailgate but didn't effect the quarter panels, bumper or frame. It was barely moving, just rolled into it. I already hung a new (used) tailgate on it. But still need to swap the rear wiper mechanism and hatch lock. The RF fender was dented so I just hung a replacement on it yesterday. Front bumper was rough too so I replaced it and the lower valance. The...
I'm looking for $2000 I got this 4runner in October of 2010 as a running/semi-driving project but it is no longer running. It needs a new bottom end, as the current one was put together poorly and is no longer runable. It is salvagable, but currently does not run. The top end is in great shape with very little miles on it and LC Engineering Stage 2 cams. Here are the specs off the top of my head. 1985 4runner red 3RZ swap using the ORS Harness. Motor had been "rebuilt", just not done quite right. It was bored .40 over, not sure on the rest of the internal specs. R150 with a v6 chain drive case LC Engineering Stage 2 cams. Marlin Crawler R series Bellousing Only rust around the windshield frame Seats from 96 Honda Accord Rebuilt front...
I have been a professional technician for the past 14 years and this has been my box for about 10 of them. The only thing not in there is a scan tool. I have not turned wrenches for about a year now and it just sits in my garage at home. All the tools are Snap-on, Mac, or Matco and are fully warrantied by them. I'm looking to trade it for an FJ60/62 or 4runner. The box and tools cost me $15k and I have receipts to prove it, I'm looking for a truck in the $8-10k range. I have pics and can send them to you upon request. Please respond by email to czop321@yahoo.com. Thanks
not availible higher end canadian edition bike needs nothing grey black triple bagged fairing crash bars full synthetic newer tires clutch never down ,this bike will be sold to my local dealer at this price in 2 days ,just thought i would offer it to a cruiser guy at the same price first. vancouver canada. pm me if you want a responce,oh for the southerners this the desirable canadian model (winter ready package)and in kilometers witch unlike our diesel trucks can be imported .this is apperantly considerred almost have the mileage and 2/3 the price. most extreme adventure riders consider this bike the diesel landcruiser of bikes with a rolls royse ride this unit is no longer availible thanks
2009 aprilia sxv 5.5 supermoto for sale or trade!
Hey guys, Thinking about selling my supermoto. Only had it a month or so but the thing is just too much for around town. Way too much power to go to the grocery store. Located in Savannah, Ga. Alittle about it. Just had it fully serviced. Everything good to go! 2009 Aprilia SXV 5.5. All stock besides. seat cover and smaller spocket for better top end speed. Have extra seat and some odd and end extras for the bike Right Radiator is bend in slightly (70 bucks from Aprilia), no leaks and cools fine. Previous owner was too short for the bike and laid it down at a stand still. Other then that the bikes flawless and all stock. Ill take a nice toyota land cruiser, jeep, or anything of the sort for a trade. Really want to sell though...
Toyota Truggy
I am selling my 1984 Toyota Truggy. It has a 4.0 l with a 6 speed manual tranny from a 2006 tacoma, dual t cases with 4.7:1 marlim crawler gears. 5.29 R&P with a detroit in the front and spooled in the rear. The front axles has longfield axles, studs and hub gears. All pro high steer and marlin crawler knuckle kit. The rear suspension has trail gears 4 link kit with 2.5 fox air shocks. The cage is 1.75 DOM and the inner cage is 1.5. DOM. Red top optima battery mounted in cab, fuel cell and much more. I hate to sell it but................ so please no low ballers $9500.00obo please call 780 838 2061
1970 Kaiser M35A2 - Deuce and a Half
1970 M35A2C, with drop side bed (rare). This truck is VA titled, and ready to go - complete with all bows, troop seats, and camouflage cargo cover, and just plan MEAN! The truck itself is super clean - and definitely an eye catcher. It was purchased solely as a fun spring/summer project ride to have fun in Northern Virginia. We've now had our fun, and ready to move on to another project. I purchased the truck this spring from a private seller in Pennsylvania. The previous owner's father is a professional diesel mechanic, who performed the following: New Radiator Removal of heads, and replacement of head gaskets All new coolant/heating hoses Replaced RR axle seal New Cab Soft Top Cab heater 1 new RR tail light All engine...

Thread Filter

Google Preferred
Back
Top Bottom