What's wrong with this picture?

[Trollhole]

Winner gets the benefit of knowing they are cruiser smarter than 99% of us.

 

[Loki]

Broken cam?
broken or missing push rod?

 

[Trollhole]

nope..

 

[BGarcia88FJ62]

Valves look like they're way out of adjustment at No.6

*You're eventually gonna tell us what it is right?*

 

[Trollhole]

your correct but that was not the answer I was looking for.

nope

 

[allan man]

Seven instead of six,,,

 

[BGarcia88FJ62]

Non-OEM rockers.

 

[hedonist]

should be up and down alternating,looks like second one from the right is not in the down position

 

[Trollhole]

all above. Nope..

 

[bigndn]

Valve cover is missing. What do I win?

 

[rutbeer]

I didn't know that valve springs would bottom out like that. Seems a bit dangerous towards killing pushrods or a cam.
Maybe your lifters are too high or your pushrods too long for the rest of the setup. Have you been mixing and matching bottom end and head parts and forget which pushrods to run?

 

[sparkplug]

Slightly overexposed. Try bumping down your ISO. Any camera/photo forum could have told you.

 

[apeterson]

I dont know but I want to... subscribe!

 

[motoloco]

The red garden hose as part of the cooling system!

 

[petescoffee]

Incorrect rocker arms?

 

[Southeast Overland]

t-case installed backwards?

 

[AATLAS1X]

Push rods are swapped from intake to exhaust?

Shane

 

[fireflyr]

Head gasket was left out.

 

[propilot]

x2 on the valve spring. Fully compressed spring leads to a bent push rod. I'd guess this is a case of valve adjustment gone really bad.

 

[Magnum44]

I thought the valve spring retainers were different from intake and exhaust. Is that correct? Looks like your missing some threads on the valve cover stud too. Maybe it's just the angle.