. Found a Brand new muffler and exhaust and great deal on some 33x12.50x15's
Welcome to the madness.
Now show some pictures.
What have you done to your Land Cruiser this week? (35 Viewers)
- Thread starter IH8MUD
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Welcome to the madness.
Now show some pictures.
Well this week I fit the front drive shaft to my 47 (been without one for the entire time I've had it)
Tested it out by going straight onto the firebreak and got bogged in 2wd. Set it in 4wd low and I was out of
Tested it out by going straight onto the firebreak and got bogged in 2wd. Set it in 4wd low and I was out of
MicahMan
TLCA 20925
Rear disc and super happy
sent from my communicator
sent from my communicator
POTATO LAUNCHER
TLCA #6928
Rebuilt knuckles, new frame to axle brake hoses,
completely rebuilt all 4 spring packs, moved the rear axle back 1.5", added 2.5" shackles with degree shims on the front for caster and put some new 35s on it.
completely rebuilt all 4 spring packs, moved the rear axle back 1.5", added 2.5" shackles with degree shims on the front for caster and put some new 35s on it.
Last edited:
Installed rear winch mount
ElHefe
SILVER Star
Which winch are you going to run?
ElHefe, I Bought a 9000lb Warn for the front a couple years ago , Then heard great things about the HF winch. So I bought the 12000lb for the back. As you can see my biuld process is a little slow, The longer I take , the more I dream up Silly things to do to my 40.
Also got some Synthetic Line from Southeast Overland (eventhough on the forum) He knows his stuff.
Last edited:
Installed Firestone air bags on the 40 it leveled it / took out the lean and raised the rear about 1.5-2". It is has not near as much lean as before around corners.
Put a CCOT car cover on it. 
Spent entirely too much money...
All lighting upgraded-
JW Speaker headlights
New OEM front turns and rear lights
Rigid 40" light bar
Rigid Dually D2 lights for peripheral lighting at night
Rigid Dually diffused lights for reverse
4+ rear swingout
4+ sliders
4+ dual battery trays
4+ rear light guards
BFG KM2's 35"
Hi Lift
Cut out center support for my rack to flush mount the 40" light
All lighting upgraded-
JW Speaker headlights
New OEM front turns and rear lights
Rigid 40" light bar
Rigid Dually D2 lights for peripheral lighting at night
Rigid Dually diffused lights for reverse
4+ rear swingout
4+ sliders
4+ dual battery trays
4+ rear light guards
BFG KM2's 35"
Hi Lift
Cut out center support for my rack to flush mount the 40" light
Redgrrr
I have a problem with 40s
Getting ready for a new third
ElHefe
SILVER Star
Niiice. What lift are you running?
Had mine out of the garage on Sunday so I could wash my Tacoma. Roads weren't all salty and it was dry so I took the cruiser for about a 6-7 mile drive. Forgot how smooth that balanced 2F is.
1911
chupacabra
Drove it 378 miles for my business (out to a drilling rig in west Texas). Made a gas mileage record for this truck, averaging 60 mph with a (mostly) tail wind: 274.7 miles on one tank for 15.8 mpg! Not bad for the original 2F.
ElHefe
SILVER Star
Nice! 33s?
Put everything back together. Installed the trans cover, seats, cage, dash pads, etc. Still need to finalize some of the wiring, like wipers and brake fluid level light but I'm BACK ON THE ROAD!!
You should be able to see all the way to Mars with that light bar
What are those rims?
OME 2.5/Bilstein shocks, extended shackles, and a 1.5" body lift to clear the trans/tc
You should be able to see all the way to Mars with that light bar
What are those rims?
Pro comp 15x8 matte black
