Here you go CD din Tablet HolderGot a link for this?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Here you go CD din Tablet HolderGot a link for this?
That’s something! Mine have only come in plastic bags with the part number sticker on them.New wiper blades. Tried inserts first but didn’t fit. A PO must have put in wrong part number blades previously. Live the detailed instructions, in Japanese.
View attachment 3280556
Those are the blades, not just the inserts.That’s something! Mine have only come in plastic bags with the part number sticker on them.
Pulled intake manifold to replace the front foam block that I nuked changing a PCV valve. It was pretty painless, less than an hour start to finish, with a good chunk of that being cleaning things before removal to avoid dust dropping into the intake ports, and the mating surface after. I considered doing a writeup but it isn't worth it.. really, it's easy.
I'm going to buy a knock sensor harness to have on-hand in the event of rodent issues.. totally viable to change it in the field if needed.
View attachment 3280890
View attachment 3280889
Yep. It then goes under the rear foam block and plugs into the larger engine harness at the gray connector.Those the clamps with 4 - 2 way split harness bolted to each side of each bank right?
How was the fitment of the Airbagman sleeves over the airbags? I just did the same kit a few days ago and the sleeve fitment was super sloppy. I was expecting a fit that was pretty close to the length of the bag, but had an extra inch on each end. Any chance you can see the sleeve part number they included with your kit?Took a step back down from the OME 2724 springs to the OME 2723 and added Airbag Man HP5051 kit.
View attachment 3281017
Also removed my Gamiviti roof rack and replaced it with a factory rack.
I agree the sleeve isn’t super tidy. Sliding the sleeve and bag into the coil was frustrating because the bag wanted to move, but the sleeve wouldn’t move much due to the excess. I assume it is that way to allow the bag to expand and contract without exceeding the sleeve.How was the fitment of the Airbagman sleeves over the airbags? I just did the same kit a few days ago and the sleeve fitment was super sloppy. I was expecting a fit that was pretty close to the length of the bag, but had an extra inch on each end. Any chance you can see the sleeve part number they included with your kit?
Conqueror!Switched over to a Mister Hitches adjustable hitch for a new articulating coupler for my camper. The rear swing out bumper ate up too much clearance and cut down on articulation so I had a new camper tongue built and switch to a Hitch-Ezy coupler, this thing is sweet.
View attachment 3282003View attachment 3282002View attachment 3282001
Oh, and we ditched the Navigator and got the Cruiser got a new roommate.
View attachment 3282005
Well hello there
Switched over to a Mister Hitches adjustable hitch for a new articulating coupler for my camper. The rear swing out bumper ate up too much clearance and cut down on articulation so I had a new camper tongue built and switch to a Hitch-Ezy coupler, this thing is sweet.
View attachment 3282003View attachment 3282002View attachment 3282001
Oh, and we ditched the Navigator and got the Cruiser got a new roommate.
View attachment 3282005
Funny you say that because I had a thread about my last breakdown in my Navigator and how dumb I was to leave my cruiser at home. True to Mud form there were some very helpful members posting Cruiser listings for me to consider. We considered them but in the end we opted for the larger people hauler minivan. It’s worth mentioning that the Sienna is AWD so there’s power to all 4 just “NO4LO” which we’ve decided will be the license plate at renewal and bonus for playing well with the Cruiser plate.I just love that there is a cruiser here not ever going to be used as a minivan. Cant do the LC wrong like that!