What have you done to your 100 Series this week? (26 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Huge improvement on our 100s
any part numbers or installation information? oh wait. this is an LX. never mind, i guess i’m stuck with crummy headlights.
HburgEagle
SILVER Star
Me and my assistant had to make a few modifications to make my spare 275/70/18 fit. The hitch I have ended up being a catch 22. When I got it, it was the one that tucked up closet to the bumper, didn't hang down and looked the cleanest. But, it took up enough room it caused this new spare to be wedged up against the panhard bar. Once I removed the hitch it fit fine. I may be able to modify to hitch and slide it rearward a bit or just get a different hitch.
To quote Peter from Dodgeball: A True Underdog Story - "I found that if you have a goal, you might not reach it. But if you don't have one, you're never disappointed. And I gotta tell you, it feels phenomenal."
Lazarus got a much needed (and deserved!) spa treatment this weekend.
Wash, iron decontamination, clay bar, compounded, polished, and finished with a ceramic spray. So shiny!
Definitely the cleanest/nicest looking this vehicle has been ever since I've owned it/brought it back to life.
Wash, iron decontamination, clay bar, compounded, polished, and finished with a ceramic spray. So shiny!
Definitely the cleanest/nicest looking this vehicle has been ever since I've owned it/brought it back to life.
No glare. The installation angle with 9" is more or less 90 degrees. There is no need to tilt this after installation unless you want it to face the shifter,.
You are most assuredly not. Dig up any of the handful of HID retrofit threads...as far as mods go, there isn't much out there that gives you as much bang for the buck.
The PO had rattle canned the side trim without any primer and covered that in a sticky chrome trim.
My turn for a rattle can paint job to try and make a better fist of it.
My turn for a rattle can paint job to try and make a better fist of it.
Got the passenger side seat done. Turned out great! Wife is very happy. Thank you Ed at Wolfmans Auto and Cycle Seats - https://hotrodupholstery.com/ next up is center console. I will do the drivers side as soon as my seat cushion comes in from Serra Toyota.
That looks like a nice match. What did the one seat set you back?
Rebuilt my fuel injectors. OEM seals, and the basket filters I got from a rebuild kit by Injector Planet.
Also got a new tool to make working on the LC easier, A Milwaukee Underhood Light.
Well, I ordered several other items, but it was right at 185 ish.
Why not just do both seats to match? Driver seat looks pretty far gone
I am waiting for my seat cushion to come in from Serra Toyota and then I will install it.
Good job! Who built the skin for you? Also, did you remove the old skin or just cover it?
Old skin remains. It’s from here. This one is just PU leather but the fit was so good that i am going to order a genuine perforated leather one. Took me about 2h to install.
https://mewantcover.com/products/me...ruiser-1996-2002-land-cruiser-prado-1996-2002
Changing out the rear flexible brake lines today, the top on on the centre line twisted the hard line.... Bugger.
Time for a new brake line, add that to the list of never ending jobs
Time for a new brake line, add that to the list of never ending jobs
