Where did you buy the gasket from?
What have you done to your 100 Series this week? (80 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Who is Ben and what do I need to do to get one of these bad boys?
Interesting it asks for premium. My 98 model (at least according to the owners manual) doesn't call for it.
I just worker out why
In the USA their Standard fuel is rated at 87 Ron and Premium is 91 ron, and in Australia Standard is rated at 91 ron and Premium is 95 ron.
Builds - Benjamin’s 3D Prints Build
Greetings. This is a half build and half promoting thread. I want to document my 3d printed parts/accessories and share the design/fabrication process. List that shows what is currently available to purchase: Make 1: Scangauge II Mount for Toyota Land Cruiser 100 Series Make 2: M2 V1: Rocker...
forum.ih8mud.com
This thread should let you know all you need to
Prinsu rack added yesterday and went out to play today.
GTV
SILVER Star
Receiver arrived. Bolt pattern is correct.
At first glance it looks like a really nice cast unit, closer examination shows the casting is not of the highest quality. Not sure I trust it entirely. That’s ok though, I’m going to use it as a test piece to build one that will put my bike rack precisely where I want it to be. I like the simplicity of this piece and the weight savings over the weight distribution hitch is enormous. I also put a dab of super glue on the cracked trim ring, looks perfect to all the ants I’m passing over.
Gotta order the new swing out from 1Up but I’m just not in the mood to drop $509 right now.
At first glance it looks like a really nice cast unit, closer examination shows the casting is not of the highest quality. Not sure I trust it entirely. That’s ok though, I’m going to use it as a test piece to build one that will put my bike rack precisely where I want it to be. I like the simplicity of this piece and the weight savings over the weight distribution hitch is enormous. I also put a dab of super glue on the cracked trim ring, looks perfect to all the ants I’m passing over.
Gotta order the new swing out from 1Up but I’m just not in the mood to drop $509 right now.
Got a set of almost brand new BBS forged TRD 18” wheels and LTX AT2 tires
Man I love the black BBS' on that black/grey.
And I couldn't help my curiosity:
And I couldn't help my curiosity:
aedgington,
haha, i like the mod
Last edited:
Eyedaho
SILVER Star
I was a little nervous looking at that hitch in the Amazon listing. The fact that it didn't specify a weight rating seemed suspicious, and the extra bolt looked odd. I'm curious about doing this same thing on my rig though, but I'm not sure what downfalls there might be. Any idea what the pintle load rating was from Toyota/Lexus when mounted there?
GTV
SILVER Star
The extra bolt is to reduce/eliminate unwanted movement, a great idea IMO. I’m not sure what the rating was but I’m certain that it will be enough to handle my bike rack. If I’ve got something big to tow, well, that’s why I recently picked up a Tundra.
looks dope but I don't trust myself to do anything electrical, so I'm looking for some shorter bolts to fill the holes... speaking of, does anyone know what bolt size I should look for?
I took the original (longer) bolts to several hardware stores and none of them had anything that would fit
Eyedaho
SILVER Star
Seatbelts are an oddball size - 7/16 UNF. I think it's so people don't use a low grade bolt. I can't remember if there's enough thread on them to cut them short enough.
GTV
SILVER Star
I've been wanting to do this! Would be really cool if they could be illuminated with the dome light or independently. Happen to have a link where you found them?
They are just 3/4" LED trailer clearance lights, but this is what I bought in 2019:
Amazon product ASIN B07DJ58NQFNote, the 3/4" grommet with the lights is a bit small to snap into the seatbelt hole, but dang close. I put a few wraps of 3M electrical tape around the grommet so they would fit snugly into the seatbelt hole. They are going on 5 years installed! I operate these with a simple rocker switch, powered by my auxiliary battery. You could easily use a double pole switch to allow them to operate them with the dome light or by themselves.
What part numbers did you use? I need to order a set and I see two different sets of part #s. One for a headlamp assembly and the other a headlamp assembly w/ clearance. I don’t know what the clearance is.
