Just myself, those harbor freight furniture dolly’s come in handy!
What have you done to your 100 Series this week? (84 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I don't think I posted a thread about it. It was heavily damaged from skidding between two trees. The right A pillar and B pillar post was was slammed and bent. Right doors, fenders, hood, front cap, bumper, and left front fender were all destroyed. Too much structural damage to the upper body to justify the expense of fixing. It's sad for me to think about it. I can look forward to moving all of the LX enhancements to the 20 LC.
That's a good idea.
Those things have been my helper on basically a million other things besides furniture moving for years. Good thing to have.
- Joined
- Jun 21, 2011
- Threads
- 230
- Messages
- 21,745
- Location
- Redding, California
- Website
- trail-tailor.com
100 SAS custom axle build. Stretched 5" and custom RCV CrMo inner axles.
J
J
Every time you post something I have a brief flash of wishing I wasn't married with children and thus poor.
Do you sell those control arm brackets and spring/shock mounts separately?
- Joined
- Jun 21, 2011
- Threads
- 230
- Messages
- 21,745
- Location
- Redding, California
- Website
- trail-tailor.com
I do. PM me for pricing
Thought I’d take a quick trip shooting. Heading home -Ih8mud. Got stuck and was digging until a tundra (my anchor) came by and I winched myself out. Not even a quarter mile I had a quick air loss and found a rock had made a hole in my rim. Short trip took a few hours…
Last edited:
We've owned this '02 100 for 15+ years and done very little to it other than routine/preventative maintenance, so we made up for it this week. Updated with new Dobinson suspension 1.5" lift, new UCAs, Ironman front bumper + 12k Badlands winch and White Knuckle sliders. I'll add either 1" or 1.25" wheel spacers soon and will eventually go with different wheels. With only 200k miles I've committed to keeping this one for the long haul.
Many thanks to our local Cruiser shop, Rory and @RocketCityCrzrs who always does a fantastic job on all of our rigs. If you are anywhere near North Alabama Rory is your guy.
Many thanks to our local Cruiser shop, Rory and @RocketCityCrzrs who always does a fantastic job on all of our rigs. If you are anywhere near North Alabama Rory is your guy.
Of all the places to have a mechanical- in a mud hole with no anchor point- glad you made it out
How is this wired?
Did the trucks 2nd 90k service at 238k, only a little overdue. Belt looked to be in good shape, radiator was original with no leaks. New water pump, radiator, belt tensioner, fan bracket and clutch as well. After I got it all buttoned up the ac light started flashing, ran diagnostics and got code 00, which I thought meant normal, still the light blinks. Guess I get to chase that down now. Wanted to thank @spressomon for the write up, that and the otramm vids got me through it.
Been making some good progress on the LC lately. Replaced the tired old rear springs with OME 2865's. Achieved my goal of a modest lift with increased load carrying capacity. Even with the help/distraction of a 5 year old I had it done in about 2 hours, including adjusting the front torsion bars.
Don't worry, the brake line and breather weren't stretched tight, though I did use all the slack.
Of course we had to take a test drive that led to a dirt road... and mud...
Don't worry, the brake line and breather weren't stretched tight, though I did use all the slack.
Of course we had to take a test drive that led to a dirt road... and mud...
Sick welds!
I'm not sure I understand what you're asking sir... It is wired up to a 5-channel amp under the front passenger seat.
Mauser
Supporting Vendor
I just did a timing belt yesterday. Did you remember to plug the compressor back in?
“This Week”
The general consensus on the forum suggests the 100's with 5 forward gears in the transmission are superior to the 100's with 4 forward gears in the transmission. Since my 1999 has the 'substandard' equipment, I have sourced parts which will allow me to upgrade. This particular 5 forward gear transmission is kind of hard to find, but it does come with a 3rd pedal attachment. I'll be sure to do a thorough write up with my findings when the mating begins
Last edited:
