excuse my ignorance, but is this a portable bbq?
What have you done to your 100 Series this week? (75 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I've seen it all, parks the 4x4 for winter and rolls the bmw for winter....priorities.
Yes, it is a portable camping braai grid..I am awaiting the 20x20x1.5 square tubing to finally build the three adjustable legs...will upload a photo when it is completed and where I am braaing meat on it..
After 2 years of dealing with driver door speaker cutting out when the door was open I decided to do something about it.
A little solder fixed it up. Wish more manufacturers made door harnesses this easy to remove/ repair..
A little solder fixed it up. Wish more manufacturers made door harnesses this easy to remove/ repair..
yea im debating. turns out it was the correct part number and pulley. but the diagram shows another pulley further down the list with a different P/N but supposedly both fit in the same position for the motor. interchangeable? dunno. I also don't know the difference. maybe ones bigger?
Wheeled the heck outta it at Cruisers on the Rocks
I had the same problem but the Toyota gods chose the wire that affected my passenger window lol.
Common. Had broken the lone ground wire so absolutely nothing worked.
Africaster
SILVER Star
Ouboet Gert, daar is bittermin Boere in hierdie plek, woorde soos braai en biltong sal die ouens maar net deurmekaar maak … soos n vekleurmannekie in n boks Smarties
I've got this exact issue. Have to turn the volume to 20 and slam the door shut and it kicks on. What section of the harness is that located?
I’m a big fan of the steelies and the color of your truck. Beautiful!
Repaired a pesky exhaust heat shield rattle. I decided to "repair" it instead of pulling it all the way off due to its proximity to the gas tank. We all know that the 100 has hot gas ventilation issues 
As good as new
As good as new
Repaired a pesky exhaust heat shield rattle. I decided to "repair" it instead of pulling it all the way off due to its proximity to the gas tank. We all know that the 100 has hot gas ventilation issues
View attachment 3149129
As good as new
View attachment 3149131
I have been meaning to put some sort of heat shield on the LRA tank since it is so close to the exhaust but haven't found a good solution yet. I am not sold on the stick on type insulation (easiest to install) because it might hold moisture which would rust out the expensive tank in no time
1. Wired up grill lights.
2. Replaced trim on both front doors.
3. Destroyed a corner light.
Next week:
1. Replace corner light.
2. Replaced trim on both front doors.
3. Destroyed a corner light.
Next week:
1. Replace corner light.
What happened and how many miles on it?
awesomeissquid
SILVER Star
Wow that’s a lot of damage! Anything in particular happen to cause it?
It occured to me scrolling past this that if you were of a type to grab the wheel, plant both feet on brakes and PANIC STOP- that could do that to a steering wheel. Also could explain any messed up clocksping, etc., in there- as those aren't exactly meant to get yanked on like that, and any side-loading could have led to the premature fail.You know that moment when you finally re-install the steering wheel correctly only to find out it is bent? You know? Cause everyone has seen't this before amirite?If anyone has a spare steering wheel hit me up, please. Thanks in advance.
View attachment 3131839
Just wondered. We will never know.
