Thanks will check them out.
What have you done to your 100 Series this week? (54 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Mauser
Supporting Vendor
Got the wiring harness for the locker Friday afternoon. Wired everything up and got it working this morning while waiting on the ol lady to get ready to go grocery shopping.
Led a 10 Toyota "Covid-19 Escape" gravel run on Saturday. Had a blast with 9 fellow Toyota enthusiasts. We got to get in 145 miles of gravel, several water splashes and a crossing of the James River and got to eat some good Central Texas BBQ picnic style on the shores of the Llano River.
Got to use my IndeFlate for the first time this trip. I thought is was a gimmick before. But, after using it, I've seen the light. SOOOOO much easier than using my ARB deflator and doesn't require removing and reinstalling the valve cores on each tire. Cross-regulates the pressures too both deflating and inflating so they are equalized. Probably could have made one myself a little cheaper. But, I'm a convenience enthusiast and will pay the price if it saves me time.
Got to use my IndeFlate for the first time this trip. I thought is was a gimmick before. But, after using it, I've seen the light. SOOOOO much easier than using my ARB deflator and doesn't require removing and reinstalling the valve cores on each tire. Cross-regulates the pressures too both deflating and inflating so they are equalized. Probably could have made one myself a little cheaper. But, I'm a convenience enthusiast and will pay the price if it saves me time.
Got some TRD BBS Pro wheels today. Trying to decide if I like them or still want Rock Warriors. Posing for pictures before I put them on. Thoughts?
I’m contemplating doing a “Heritage 100 Series” build and doing some Brass Monkey plasti dip if I do keep them.
I’m contemplating doing a “Heritage 100 Series” build and doing some Brass Monkey plasti dip if I do keep them.
Last edited:
Look sharp! I’m moving closer to all black wheels on my white LX as well, though I’ve got more black details, and will soon have more (Bumpers, sliders, roof rack).
Added a piggyback ECU and dropped my 0-60 time by nearly a full second! Dragy confirmed! Dragy: Amazon.com: dragy 10Hz GPS Based Performance Meter: GPS & Navigation
Finally tackled the drivers side valve cover gasket, spark plugs, and spark plug tube seals. Easy enough job. Lost one of the valve over bolts though. Searched for a good 45 mins before giving up and just picking through my spare parts bin to find another. All in took 2hrs. Just goint to wait to tomorrow to start it up and check for leaks since the silicone needs to set anyways. 
forgot to add the cabin filter change too. Old ones were gross!
Last edited:
Installed trail talor rear upper and lower arms. Now gotta take it in to have them adjusted
Replaced heater t’s and 7 spark plugs. One is still stuck and currently on a PB Blaster soak. Any tips for safe removal?
Joined the ARB club!
Thanks for sharing. I have been researching sound deadening options too.
Just curious why no love for the bulkhead/firewall?
Just curious why no love for the bulkhead/firewall?
Get bicycle brake cable... I've used it on my old trucks for the hood release. So far so good.
Dam... I'm jealous... Need to do the same here and go to Shenandoah Valley.
WKOR Sliders! 
now i just need some tires!
now i just need some tires!
I did the outer firewall on my cruiser, a noticeable difference. To do it right I would remove the dash entirely. But that's more hours than some customers care to pay.
Fixed a small coolant leak, and replaced the starter while I was in there. Up next, rear pinion seal.
295/70/18 or 285/70/18WKOR Sliders!
View attachment 2280294View attachment 2280293View attachment 2280292View attachment 2280291View attachment 2280290
now i just need some tires!
km3’s...they look sick
WKOR Sliders!
View attachment 2280294View attachment 2280293View attachment 2280292View attachment 2280291View attachment 2280290
now i just need some tires!
yes ASAP, this just looks so wrong lol
Long time lurker first-time poster. I took a trip down to the freight terminal in SOCAL to pick up a load. Ironman Foam Cell Pros all the way around, coil springs, torsion bars, and a nice cowcatcher for the heck of it. Trail Tailor diff drop is OTW. Good deal overall with the current sale going on. I was hesitant with the bumper purchase at first as I have always planned on going with the ARB, however, it seems like a quality piece and comes wired with lights.
I went with the 2.5" lift / constant load option as I will be adding runners, rear bumper and roof rack in the near future.
Cali truck. Second owner 99' 100 Series w/ 147XXX on the clock.
It should be a fun weekend. Any tips for the install would be greatly appreciated. Thanks for everything ya'll do here on MUD.
I went with the 2.5" lift / constant load option as I will be adding runners, rear bumper and roof rack in the near future.
Cali truck. Second owner 99' 100 Series w/ 147XXX on the clock.
It should be a fun weekend. Any tips for the install would be greatly appreciated. Thanks for everything ya'll do here on MUD.
| Toyota 100 Series Land Cruiser/Lexus LX470 Classic Off Road Bumper | BBCD006 |
| Toyota 100 Series Land Cruiser/Lexus LX470 Foam Cell Pro 2" Suspension Kit - Constant Load (440-880LBS) | TOY050CKP |
