What do I have? 40 newb (19 Viewers)

[Jim S.]

In tank set up is where its at! Good choice! Use an fzj80 or 2uz fuel pump. Very quiet compared to walbro

I have the the FZJ80 pump in my 2FE 40 tank. Been in use about 11 years now problem free.

 

[Ditcherman]

Looking forward to that simple install.

Oh you went and done it now!!

 

[clrussell]

Oh you went and done it now!!

If I screw that one up I’m burning it

 

[clrussell]

Thanks @cruisermatt and crew

 

[cruisermatt]

Something I Ran into this week.. my slave cylinder rod is about 1” too long. I’m wondering if I used the wrong pivot fork or the wrong throw out bearing..

@cruisermatt any input?

Pics?

 

[cruisermatt]

Thanks @cruisermatt and crew

Thanks for the order!! Even small ones help keep the lights on.

 

[clrussell]

Pics?

Yeah I forgot that part yesterday.

 

[cruisermatt]

Well I see your problem clear as day.
That’s the 3-speed fork and bearing hub.

Sorry

 

[clrussell]

Well I see your problem clear as day.
That’s the 3-speed fork and bearing hub.

Sorry

I was afraid of that.

Guess I’m on the search for the 4 speed one.

Any chance you have one you want to part with?

 

[cruisermatt]

I was afraid of that.

Guess I’m on the search for the 4 speed one.

Any chance you have one you want to part with?

No need to search. That’s the easy part. I’ve got plenty of them here

 

[clrussell]

No need to search. That’s the easy part. I’ve got plenty of them here

I’ll reach out tomorrow and get one.

Thanks Matt

 

[clrussell]

Good conversation with Matt today. Even on a Sunday. I owe him a beer or 7.

Zero 40 progress today. Great day slowing down time with the family.

 

[clrussell]

I was able to finish mocking up my exhaust and got it all tacked together. Small stainless Cat Converter in there as well. 2.5” all the way back.

And yes I’m aware I’m going to have to redo my crossover by the front driveshaft. I swung and missed on that one.

 

[clrussell]

Clutch master, slave, line ran and mounted.

Power steering lines ran, cooler mocked up.

Big but small steps.

List is getting shorter.

 

[clrussell]

Small day again yesterday.

-Exhaust welded out
-Oil pressure sensor adapter installed
-Fuel tank prepped for ring- first cut made and didn’t go boom
- Clutch Parts arrived from Florida from Matt

 

[Ditcherman]

Small day again yesterday.

-Exhaust welded out
-Oil pressure sensor adapter installed
-Fuel tank prepped for ring- first cut made and didn’t go boom
- Clutch Parts arrived from Florida from Matt

View attachment 3951703

View attachment 3951704

Those “small” days really make a lot of progress to bring the end result.

 

[knuckle47]

@clrussell is there a technical name for the steel woven fitting between the flange and the cat?

 

[Skreddy]

@clrussell is there a technical name for the steel woven fitting between the flange and the cat?

Flex pipe or flex joint. I’ve started using them the last few years and they are really nice.

 

[clrussell]

Tank cut, welded out, and some paint.

Managed not to die

 

[archie73]

Tank cut, welded out, and some paint.

Managed not to die

That’s the important part of it