What Did You Do with Your 80 This Weekend? (49 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Jeebus that's a lot of bikes! I prefer to drive.
 
What happened? :p
:lol: Honestly had the CB installed long before the HAM. To lazy to remove and my bracket broke, so figured since it was already installed and there, may as well keep it functional for my minions.
 
Got my new O2 sensors in this morning. It was way more complicated than it should have been. All the nuts came off pretty easy, but the PO of my truck installed the EMS exhaust. The wiring harness on my new front O2 sensor wasn't long enough.

Once I took the old one apart to see how much longer the wires were I saw that he had spliced about 6 extra inches of wire in. I didn't want to do that. So I ended up opening up the factory wire loom and moving the O2 wires forward several inches. So, at least it will be easy for future repairs now.
 
Did a test fit/setup in the backyard with the new Tepui Autana Ruggedized a couple days ago, then took the tent back off so I can fit in the garage. :) Loving this new tent. With my lift (~5.5") I needed to use an annex extension that adds about 12" of length to the bottom of the annex but now it's just about perfect.




 
Did a test fit/setup in the backyard with the new Tepui Autana Ruggedized a couple days ago, then took the tent back off so I can fit in the garage. :) Loving this new tent. With my lift (~5.5") I needed to use an annex extension that adds about 12" of length to the bottom of the annex but now it's just about perfect.





I so want that tent. I bought a new ground tent (don't ask) and first thing my 5yr said was "You bought the wrong one daddy! You were supposed to get the one that goes on top of the truck and has the play area below for me." :doh:
 
Became necessary to do the brakes before I tore it all down for gears and lockers :-(

1435430740880.jpg
 
Finished up installing the 4x4 Labs bumper right before the storms hit. Still have to mount the tire carrier and ladder but that's an easy job.

1435431381300.jpg


1435431401780.jpg


1435431423170.jpg


1435431440369.jpg


1435431455666.jpg
 
Finished up installing the 4x4 Labs bumper right before the storms hit. Still have to mount the tire carrier and ladder but that's an easy job.
I hate you right now
 
I gave my 80 a bath and parked it in the back garage until weather gets worse.

I just got this running again, after nearly a year down, and engine and transmission change.

I think Marjan, my series 80 gets to have some down time while I stretch Daisy, my convertible 1967 Mustang's legs a bit.

11667145_10206215701185932_1472218440_n.jpg


It's my first car, 35,700 actual miles. I bought it new in 1976, as it was wrecked on a test drive and the dealer fixed it, but no one wanted to buy a wrecked new car. Converted it from bone stock I6 200 ci to warmed over roller motor.

Video:

 
I gave my 80 a bath and parked it in the back garage until weather gets worse.

I just got this running again, after nearly a year down, and engine and transmission change.

I think Marjan, my series 80 gets to have some down time while I stretch Daisy, my convertible 1967 Mustang's legs a bit.

View attachment 1099223

It's my first car, 35,700 actual miles. I bought it new in 1976, as it was wrecked on a test drive and the dealer fixed it, but no one wanted to buy a wrecked new car. Converted it from bone stock I6 200 ci to warmed over roller motor.

Video:


Nice! My dad, Grandpa, and I restored a 68 Dodge Charger (it was my dad's first car). Then, I brought it up from Florida to the mountains in SC and a tree fell on it. I'll put up before and after pics soon.
 
Adam, that's an enviable setup! I have to ask, where did you get (or make) the little avatar of your LC? It's awesome!
 
Did a test fit/setup in the backyard with the new Tepui Autana Ruggedized a couple days ago, then took the tent back off so I can fit in the garage. :) Loving this new tent. With my lift (~5.5") I needed to use an annex extension that adds about 12" of length to the bottom of the annex but now it's just about perfect.

Let me try that again: Adam, that's an enviable setup! I have to ask, where did you get (or make) the little avatar of your LC? It's awesome!
 
My 80 took me back to Harbor Freight to buy a jigsaw for my tailgate cutting board project and some air fittings and regulator for my PUMA compressor. Plus about 4 impulse items en route to the register.
 
My 80 took me back to Harbor Freight to buy a jigsaw for my tailgate cutting board project and some air fittings and regulator for my PUMA compressor. Plus about 4 impulse items en route to the register.

Freaking Marjan knows that trick as well. Regardless of where I mean to go, always ends up taking me back to HF.
 
My 80 took me back to Harbor Freight to buy a jigsaw for my tailgate cutting board project and some air fittings and regulator for my PUMA compressor. Plus about 4 impulse items en route to the register.

I need NOTHING from HF. And I know that the majority of their stuff is crap but I seem to always end up there and buying something I have no need for.
 

Users who are viewing this thread

Back
Top Bottom