Looks really good. What color is that?
What Did You Do with Your 80 This Weekend? (46 Viewers)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
mehbohdi
SILVER Star
OEM Moon Glow Pearl
Reinforcing the rear lower links.
I have bent a few sets, this is the $20 fix.
Going to print some new bushings.
View attachment 3165716View attachment 3165717
Aslo added the tailgate strut, thanks to @Obrokoff
I ended up finding a cable that is the right length 15in. Dorman 38536 Then put the bolt on a lathe so it can hold the cable and strut.
I made a kit to sell, so you can choose your own adventure.
Soft Tailgate kit
Tailgate kit Idea taken straight from ih8mud. https://forum.ih8mud.com/threads/what-did-you-do-with-your-80-this-weekend.586191/page-3253 This is is not an easy install, take your time and review the pictures ask questions. Just a kit to make your life easier.. Comes with a pre-made cable to...solvefunction.com
Definitely ordering a kit!
When do you think they'll be available? Site is listed as backordered.
Outsane
Supporting Vendor
Parts coming in this week
Did some cleaning. Not perfect, but better.
Aslo added the tailgate strut, thanks to @Obrokoff
I ended up finding a cable that is the right length 15in. Dorman 38536 Then put the bolt on a lathe so it can hold the cable and strut.
I made a kit to sell, so you can choose your own adventure.
Soft Tailgate kit
Tailgate kit Idea taken straight from ih8mud. https://forum.ih8mud.com/threads/what-did-you-do-with-your-80-this-weekend.586191/page-3253 This is is not an easy install, take your time and review the pictures ask questions. Just a kit to make your life easier.. Comes with a pre-made cable to...
Nice
That's way better! Now get some foam strips to put between the top of the radiator and the radiator support. Helps with cooling....if you wanna
Added some Soutwestern bedazzle.
1990 HDJ80 w 1HD-T: Swapped connecting rod bearings, installed all aluminum radiator, silicone coolant hoses, new alternator, swapped 24v for new 12v starter, deleted voltage convertor, new thermostat, oil pressure sensor, fuel filter heater, new fan clutch, new belts and filters. Got parts from Back40.
Last edited:
COYS
SILVER Star
Just arrived from jpn. Becoming that old guy hoarding Toyota parts guy.
Your hood heat reflector is sweet.
Recently I found out my VAF was out of spec, @swamp-thing answered the call and had a known good one.
It arrived today and installed the VAF along with new gaskets as well. The Land Cruiser actually idles a lot better (600 RPM) and the drive ability is so much better. Next step is to take it and get emission tested again, wish me luck.
Also, while I was in there I noticed my "S" shaped hose for the PAIR system was cracked. With that hose NLA from Toyota I asked the guys at Toyota if they could match it, they did not have the exact match but something really close.
Part number 16571-0P210 is a radiator hose for 2008-2013 Highlanders.
It arrived today and installed the VAF along with new gaskets as well. The Land Cruiser actually idles a lot better (600 RPM) and the drive ability is so much better. Next step is to take it and get emission tested again, wish me luck.
Also, while I was in there I noticed my "S" shaped hose for the PAIR system was cracked. With that hose NLA from Toyota I asked the guys at Toyota if they could match it, they did not have the exact match but something really close.
Part number 16571-0P210 is a radiator hose for 2008-2013 Highlanders.
Last edited:
Dave is great to deal with
Lots of progress on my build this weekend. Finished the drawers and bezel and got the sleeping deck installed. Loading it into a container and shipping it to Colombia this week so it’s crunch time. Changed the oil for good measure.
Looks nice! I would be scared to ask how much all that wood weighs...but how much?
Nice! I did the exact same thing last November after bending a rear LCA. Press back to straight and weld on some 90 degree. ). Your welds are nicer than mine though. lol
Decided to start cleaning the mess of cables in the engine bay.
Changed earth cable attached to engine block and some.how the car is running very low at startup, maybe the idle control valve got effected some how.
I need a major overhaul, it cant be small repairs too much of mess for that.
I need to buy heatshrink as well and redo the temporary fixes
Changed earth cable attached to engine block and some.how the car is running very low at startup, maybe the idle control valve got effected some how.
I need a major overhaul, it cant be small repairs too much of mess for that.
I need to buy heatshrink as well and redo the temporary fixes
Last edited:
Last little coolant hoses - front caliper hoses next & time for fresh pads.
My tiny garage that rarely sees vehicles. Usually work at my dad's - more room, extra tools, free beer
My tiny garage that rarely sees vehicles. Usually work at my dad's - more room, extra tools, free beer
Last edited:
Sweet platform, well done. Stealing a couple ideas for future plans.........
Last edited:
