jfz80
Cruisin’
Phil, This seems appropriate here 
What Did You Do with Your 80 This Weekend? (35 Viewers)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Not all done "this weekend", but my last couple of weeks have been quite busy. In the past two weeks I did:
- Pesky Heater Hose (true to its name)
- Had both diffs rebuilt and regeared to Nitro 4.88s
- Rebuilt both axles, with new OEM seals
- Replaced front brake calipers
- Upgraded all brake lines to Slee SS lines (axle to caliper; frame to axle done earlier)
- Rebuilt front drive shaft (new OEM joints)
Nice work! Who did the differential gears and how much, if you don't mind me asking?
LS1FJ40
SILVER Star
Sounds good! Looking forward to it!
Box Rocket
SILVER Star
I'm halfway through a front axle rebuild to fix a bunch of crap that got screwed up when I was having my new gears done. It's a long story..... but so far, it's included a busted wheel speed sensor, broken abs sensor, improper preload on wheel bearings, knuckles almost void of any grease, damaged front driveshaft, camber way off. Hoping to not find too much more while I finish it up.
The Nitro 4.88 gear sets (front and rear, plus the "master install kits" were right at $1000 for the parts. I did the labor to remove the axles and carriers, and took the carriers to the shop. The shop did the gear setup and master install kits for $665.
I had another few hundred bucks in miscellaneous seals, grease, hub studs, etc. to renew a bunch of stuff "while I was in there," and the drive shaft was a bit of a surprise. The joints were around $40 apiece from my local Toyota dealer - they give the local TLCA chapter members a great deal on parts. (Thanks Stevinson West!)
All in it was probably a $2000 week for the Cruiser. I save money in labor so I can afford to buy quality parts.
That's a bummer. Another really good reason to do as much of the work yourself. As much as I trust the shop that setup the gears in the diffs, I am really anal about preload, grease quality, torque specs, etc. The only way I could know it was done to my standards is if I did it myself.
That and the more I do the heavy lifting on the 80 the better I know my vehicle. The better I know it, the more likely I can diagnose and treat problems as they arise.
Was awesome meeting you and Matt up on the mountain! Your rigs are inspiring and the quality of your photos has me ready to upgrade my camera.
Thanks Steve! Was nice running into you up there. When I saw you coming down the hill I told my wife, I bet he's on MUD
Looking forward to your new and improved photos
OH man! Have fun. Great place. I won't be there, but my 80 will.Changed the engine oil and gear oil. Getting her ready for an 11hr drive to Cruisin' the Woods in Oregon this weekend.
View attachment 1324500
My little helper is supposed to be helping, not making more mess!
View attachment 1324501
After the oil change, I cleaned the interior, vacuumed the carpet. Still had some dirt from the Gold Lake camping trip.
View attachment 1324508
I need a saw zall and cut my garage door and make it taller! Or a bigger drive way!
View attachment 1324510
- Joined
- Jun 21, 2011
- Threads
- 233
- Messages
- 21,818
- Location
- Redding, California
- Website
- trail-tailor.com
LS1FJ40
SILVER Star
Hell yeah!!
Just picked my 93 up with all new bushings and u joints so I'll really be able to notice the true difference in ride. Can't wait!
LS1FJ40
SILVER Star
Can't wait!
- Joined
- Jun 21, 2011
- Threads
- 233
- Messages
- 21,818
- Location
- Redding, California
- Website
- trail-tailor.com
tampacruiser95
Upgrades are coming.
Not the weekend, but installed 280z louvers...also first picture with the Prinsu
OH man! Have fun. Great place. I won't be there, but my 80 will.
Bummer.
We're excited! Taking the 60-80-100!
Who's driving your 80 there?
Look for @ThreeEyedBandit in my 80, @knoll0351 in his red diesel samari and @CreeperSleeper
Have fun, it's a great event. If you need anything passing through the Rogue Valley (Medford/Grants Pass) hit me up.
Box Rocket
SILVER Star
I agree which is why I do almost all the work myself with few exceptions. Setting up gears is not a job I'm 100% comfortable with on my own, even though I helped do the setup on my FJ40 and my mini truck. I guess this just motivates me to get comfortable doing gears too.
Couple of weeks back now, polished it up for a local car show. 6 hours of washing and buffing later but I got a trophy for best 4wd even with all the scratches 
Last weekend it dumped 60mm of rain on us in 12 hours, all waterways were running, so went out for a sunday drive and proceeded to somehow land in the softest slop imaginable. Bogged it to the door, lockers just kept digging a bigger hole
All part of the fun though, made sure I hit a few more creeks to wash the worst of the mud off after 
Last weekend it dumped 60mm of rain on us in 12 hours, all waterways were running, so went out for a sunday drive and proceeded to somehow land in the softest slop imaginable. Bogged it to the door, lockers just kept digging a bigger hole
All part of the fun though, made sure I hit a few more creeks to wash the worst of the mud off after 
Got my Prinsu Roof Rack and CVT tent mounted
LS1FJ40
SILVER Star
Couple of weeks back now, polished it up for a local car show. 6 hours of washing and buffing later but I got a trophy for best 4wd even with all the scratches
Last weekend it dumped 60mm of rain on us in 12 hours, all waterways were running, so went out for a sunday drive and proceeded to somehow land in the softest slop imaginable. Bogged it to the door, lockers just kept digging a bigger hole
View attachment 1324868 View attachment 1324869 View attachment 1324872 View attachment 1324877 View attachment 1324874
Perhaps it the added weight of the steering wheel on that side...
I threw 37's on my stock 80.
