What did you do with your 60 this weekend? (44 Viewers)

[Godwin]

Finished wiring up the Warn 8274 and tested it. Works great, now need to spool on the cable.

 

[Skniper]

I thought about contacting BFG cause like I mentioned above, tires have less than 1500 miles, but wasn't sure if the use of the skinny oem steelies would void any type of warranty...

Are they 10.5’s? If so I would bet they’ll call BS on the failure.

 

[WSOPgold2012]

Out with the old....

 

[meatloaf]

Are they 10.5’s? If so I would bet they’ll call BS on the failure.

yes, 33X10.5X15

 

[HemiAlex]

I’ve heard of that happening with the original KOs but they changed the rubber composition for the 2s. That’s terrifying. Glad you’re good.

I had a 30k set of k02 warrantied due to safety concerns. All four tires had cracking between the lugs and looked like 10 year old tires. My spare that had never been on the ground looked like new, and it had been on the bumper exposed to the sun for years.

4wp gave me half my value back of the tires at 5/32 left. Give BFG a call directly.

 

[meatloaf]

I had a 30k set of k02 warrantied due to safety concerns. All four tires had cracking between the lugs and looked like 10 year old tires. My spare that had never been on the ground looked like new, and it had been on the bumper exposed to the sun for years.

4wp gave me half my value back of the tires at 5/32 left. Give BFG a call directly.

Thanks @HemiAlex , I am going to call BFG

 

[HemiAlex]

Completely not normal. My buddy had his lugs start chunking off from the same cracks.

 

[Silveredition]

My big weekend job is done!! After putting up with a broken bonnet stay clip for 5 years (and using various hardware shop solutions that all broke), I asked at Toyota - and they still have them in stock!! $3 and it is fixed with a genuine part!! So happy!!

 

[BadReligion]

My big weekend job is done!! After putting up with a broken bonnet stay clip for 5 years (and using various hardware shop solutions that all broke), I asked at Toyota - and they still have them in stock!! $3 and it is fixed with a genuine part!! So happy!!

View attachment 2646929

View attachment 2646930

View attachment 2646931

Mind sharing the PN?

 

[WSOPgold2012]

This happened....

 

[MoaByte]

So, new oil pan gasket, RM seal, new clutch, resurfaced FW, new OEM hardware, new TC, with a new H55F? I'm jelly.

 

[WSOPgold2012]

So, new oil pan gasket, RM seal, new clutch, resurfaced FW, new OEM hardware, new TC, with a new H55F? I'm jelly.

Yes, yes, yes, yes, yes, yes AND yes!!

 

[Silveredition]

Mind sharing the PN?

Sorry - I didn’t even bother with a receipt!

 

[MoaByte]

Mind sharing the PN?

I think city racer has them. I fixed mine when I replaced the swivel grommet just a couple weeks before adding lift shocks.

 

[Scro]

Mind sharing the PN?

Toyota Part No.: 53452-90351​

HOLDER, HOOD STAY

 

[brian az]

I think city racer has them. I fixed mine when I replaced the swivel grommet just a couple weeks before adding lift shocks.

@ToyotaMatt has them too, along with the rubber grommet that goes on the other end of the rod.

 

[johnnyshaner]

Replaced the hood release and replaced my mismatched lug nuts with the correct ones.

 

[rlocke49]

Got this tired old 2F pulled, stripped and dropped off at the machine shop for a rebuild. Now on to the t-case!

 

[MoaByte]

Installed my new Koito Light Kit:

View attachment 2635078

View attachment 2634412View attachment 2634413View attachment 2634415
View attachment 2634422

Needed to rearrange my aux fuse box a bit to get everything to fit. Made a little relay rack for the Koito relays along with my Hella Black Magic light relays. Now they all fit together and are out of the way of hood springs and whatnot. Install couldn't have been easier with how the kit is packaged up. Hopefully this kit will get me improved light from the stock setup. I still can't believe this thing is only $50.

@Gretsch, where did you get that fuse block? Did it come with the relay bracket? It has a "+" bus?

 

[Scro]

Replaced the hood release and replaced my mismatched lug nuts with the correct ones.

View attachment 2648089

View attachment 2648092

Part number for the hood release cable?