What did you do with your 60 this weekend? (19 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Ill see your scratch and raise you some body cancer.
20180803_182057.jpg
 
Took the longer but more scenic way home from SAS2. Engineer Pass, CO
Engineer Pass.jpg
 
IMG_20180812_094928245.jpg
Ran out of talent backing out of the barn.

This is why I drive junk
]
Oouch!! I can only imagine how pistoff you are. I will be waiting to see how you repair it and what it costs to do so.
I got rear-ended by a rock my bumper nocked loose on the trail and it botherse every time I see it.
 
H55F with a rebuilt split case from georg.

It’s a whole new truck!

AE18B49A-B145-47F6-B921-F8AC241D0676.jpeg


22DBB710-FB59-4AC0-8B7C-2B35D5107A44.jpeg


8AF0FE87-D9EB-42C8-B5DD-8FEFEADDA606.jpeg
 
What elevation is Engineer Pass. Do the Colorado Rockies have any snow from last winter left?

12,800 ft.
All I saw was one tiny snowfield way high on the north side of a big mountain........ so the real answer is no, the usual snow is long gone.
All the reservoirs we drove past were very low to empty.
 
12,800 ft.
All I saw was one tiny snowfield way high on the north side of a big mountain........ so the real answer is no, the usual snow is long gone.
All the reservoirs we drove past were very low to empty.
That’s amazing your taller than Mt. Adams in Washington the 3rd highest peak in the Cascades at 12,276’ and no snow. Mt. Adams is behind me. This was on my 36 mile Loowit trail hike around Mt. St. Helens that blew in 1980. Adams is an awesome climb and ski decent for you Colorado ski buffs. Helens is fun also but shorter.

D6698BB8-1DA2-4813-90AA-D3E7AB344D05.jpeg


D37655D8-3DB2-43A4-BADC-9A2F34A43D6D.jpeg
 
Last edited:
No real pictures but finally finished my exhaust and found out why it seemed to rattle so much and confirmed that my cat was pretty much toast. PO or exhaust shop, in their infinite wisdom, decided that the O2 Sensor was something you should completely weld into place and the front most hanger for the exhaust should be completely welded on (which ended up being welded to the exhaust insulator which had actually broken and was just sitting on top of the bracket).
 

Users who are viewing this thread

Back
Top Bottom