RodrigzCrzr
SILVER Star
Added new fender marker lights and replaced this old green flasher unit for a new one. Now I have working turn signals.
What did you do with your 60 this weekend? (38 Viewers)
- Thread starter MrMoMo
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Drove the piss out of it after 2.5 months under the knife.
New block (135k); rebuilt original head (175k), clutch; power steering pump; steering gear box, water pump; exhaust; crank pulley; tie rods; re sealed t case; odyssey battery; interior upgrades; a bathtub full of waxoyl..and now, only 10 million other things to address.
New block (135k); rebuilt original head (175k), clutch; power steering pump; steering gear box, water pump; exhaust; crank pulley; tie rods; re sealed t case; odyssey battery; interior upgrades; a bathtub full of waxoyl..and now, only 10 million other things to address.
drove 7 hours yesterday across the frozen saskatchewan prairies and back. left when it was -41 and came home to -33. i love my webasto for starting in these temps. the truck didn’t miss a beat
Threatened to throw a wrench through the windshield again. Some new parts courtesy of Summit.
Replaced my non functioning lights in the rear Defrost button.
Left one is the OEM housing and Incandescent bulb. Right is the LED replacement from Superbright LED.
You need to straighten out the wires and pull the incandescent bulb so you can swap the LED into the OEM housing.
You will need 2x per defrost button (green face light and orange "ON" light)
I used 2x NEO3-NWHP from superbrightLEDs.com in natural white color.
Cheap mod. $9 with shipping.
Left one is the OEM housing and Incandescent bulb. Right is the LED replacement from Superbright LED.
You need to straighten out the wires and pull the incandescent bulb so you can swap the LED into the OEM housing.
You will need 2x per defrost button (green face light and orange "ON" light)
I used 2x NEO3-NWHP from superbrightLEDs.com in natural white color.
Cheap mod. $9 with shipping.
- Joined
- Jul 22, 2012
- Threads
- 575
- Messages
- 16,119
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
Put the finishing touches on my new front bumper.
Last edited:
brooksfj60
SILVER Star
Got stuck. Well not really, it got too steep and I didn’t have enough gas in the tank so it shut off. Had to go get dads 40 to winch me up the hill. Once I was on flat ground it fired up
Any tricks on pulling that switch apart without breaking it?
Getting the AC dash bezel off to get the electric plug undone was the hardest part. The switch itself is pretty tough. One banana job for sure.
anyone know if the switch in a 62 has a light in it and would this mod work in our case? my switch doesn’t light up but it looks like it should
Off with this.....
And then on to these from McMaster Carr.
Added a JimC pulley and his other desmog goodies. Used @Borick ’s online guide which made everything super easy. In the end, after a slight idle mixture screw adjustment it was purring like a kitten. Vacuum numbers are up and I’m pleased with the results!
And then on to these from McMaster Carr.
Added a JimC pulley and his other desmog goodies. Used @Borick ’s online guide which made everything super easy. In the end, after a slight idle mixture screw adjustment it was purring like a kitten. Vacuum numbers are up and I’m pleased with the results!
CenTXFJ60
SILVER Star
Was lucky enough to have a few MUD members hang out yesterday. Cooked some burgers on the grill and had a few beers 
CenTXFJ60
SILVER Star
Was lucky enough to have a few MUD members hang out yesterday. Cooked some burgers on the grill and had a few beers
If it's feral you need to go back and kill a few hundred more.
Installed new grill and headlight covers..
Last edited:
About time!!!!
