- Thread starter
- #61
Does it mean that the shop did the caster bushing upside down to cause the negative caster?Seriously, forget Luigi and his exotic Italians. Find another shop.
You have negative caster. This is horrible, and for the most part, it's responsible for what you're not happy with.
You should have around positive 2⁰ to 4⁰ of caster.
If you have negative caster after fitting correction bushes, your only options are aftermarket radius arms such s Delta, or drop brackets.
Rear camber is not adjustable on these vehicles.
The camber reading here is either a measuring error, or a bent rear axle housing, I'd say measuring error.