Trail Tailor Offerings- Racks, Sliders, Control Arms and Misc

[Somebodyelse5]

So is your goal here to rip on someone’s livelihood? If you have a question on this it would seem that a private message or email would be more appropriate than the thread where he posts his hard work and support of our niche community.

Tech forums to discuss tech. Vendor forums to promote livelihood.

 

[elcajon]

Tech forums to discuss tech. Vendor forums to promote livelihood.

I think that is a legit question....and potential snag areas...

 

[Beams37]

I think if people don't like the design, they can buy something else.

 

[Lndcrzr100inTN]

Jason provides many pictures of his products and quality. I know from personal experience if you request/desire more he is more than willing to provide. If you feel this is a concern I would recommend more research on you next accessory/mod purchase rather than point out what you could have realized with a little more insight to viewing pics. Not being a dick here, but by no means do I agree with your claim, I just can view photography and know if it is something I like!

 

[TRAIL TAILOR]

Several have asked if I will be making my 100 bumpers I just made. Short answer is not anytime soon. So @benc (Dissent) will be the one I will continue to push inquiries to. Ben has been very gracious in referring and ordering my smaller parts for his customers and custom build offerings and I truly appreciate it. As you all know I take care of who takes care of us. Thanks Ben.

I've been struggling with a dislocated ribs injury since early this year. It's better, but every time I think I'm healing up and try to lift something over 100# or more it flares back up for several more weeks. It has been really hard for me in the shop to isolate projects and refuse to make certain products. I'm getting older and just need to get over the fact I can't walk around with 150# under one arm anymore.

So I will continue to focus on smaller parts and pieces and sliders only when I feel healthy enough. Right now sliders are off the table. Need to recoup a bit from the last run of 30 sets. I truly appreciate the continued support, referrals and orders we receive.

Jason

 

[TRAIL TAILOR]

A few items on sale now.

J

100 Series IFS Differential Drop Crossmember

Toyota Land Cruiser 100 Series Lexus LX470 IFS Differential Drop Crossmember Made from laser cut 3/16" A572 HSLA steel Supplied with 8.8 and 10.9 grade hardware and 6061 aluminum spacers Available in black powdercoat

trail-tailor.com

Sand Recovery Boards

Custom Fabrication for Toyota Land Cruisers and Specialty Reproduction Products for Geriatric Cruisers

trail-tailor.com

Antenna Mounts

Toyota Land Cruiser Antenna Mounts 60 Series 80 Series 100 Series Convert the stock location to a dual CB and AM/FM antenna This mount will need a CB splitter and other components to complete the install

trail-tailor.com

Antenna Light Mount 100 Series

Made from laser cut 12 gauge 304 stainless steel CNC bent TIG welded Each mount has a 1/2" antenna hole and a slotted light hole Installs with factory equipped hardware Available in bare metal

trail-tailor.com

ALL COMEUP WINCHES AS WELL.

 

[Mdej3]

Any idea when the roof rack mounts for the 100 series will be available? Thanks!!

@TRAIL TAILOR ??

 

[TRAIL TAILOR]

@TRAIL TAILOR ??

Several weeks out on more. Check with @nakman for these if in a hurry

J

 

[TRAIL TAILOR]

Tow points are in production at the laser shop.

Many calls over the past year for the old style (for steel shackle, non radius eye) Mainly the inquiries are pricing/cost related but for the guys not running soft shackles the extra expenditure wouldn't need to be made.

So I'll be offering more options in a few weeks.

Jason

 

[aaronrules]

A few items on sale now.

J

100 Series IFS Differential Drop Crossmember

Toyota Land Cruiser 100 Series Lexus LX470 IFS Differential Drop Crossmember Made from laser cut 3/16" A572 HSLA steel Supplied with 8.8 and 10.9 grade hardware and 6061 aluminum spacers Available in black powdercoat

trail-tailor.com

Sand Recovery Boards

Custom Fabrication for Toyota Land Cruisers and Specialty Reproduction Products for Geriatric Cruisers

trail-tailor.com

Antenna Mounts

Toyota Land Cruiser Antenna Mounts 60 Series 80 Series 100 Series Convert the stock location to a dual CB and AM/FM antenna This mount will need a CB splitter and other components to complete the install

trail-tailor.com

Antenna Light Mount 100 Series

Made from laser cut 12 gauge 304 stainless steel CNC bent TIG welded Each mount has a 1/2" antenna hole and a slotted light hole Installs with factory equipped hardware Available in bare metal

trail-tailor.com

ALL COMEUP WINCHES AS WELL.

Just ordered a diff drop and antenna dohicky last night!

 

[ga12r1]

Just ordered a diff drop and antenna dohicky last night!

Hey Aaron I forgot to ask how you liked that Tough Dog setup at HIH? I know the 45mm adjustables were fantastic for me last year.

 

[aaronrules]

Hey Aaron I forgot to ask how you liked that Tough Dog setup at HIH? I know the 45mm adjustables were fantastic for me last year.

I am super glad I listened to you and Jason and went with the Tough Dog set up! The adjustable rear shocks were fantastic! I honestly didn’t think they would make that much of a difference, but on the softest setting they soaked up quite a bit! And the extended sway links Jason has helped a lot as well!

Guys, if Jason has it...buy it!

 

[aaronrules]

I also wished I would have seen the CB antenna thing before HIH! I ordered it along with my diff drop last night!

 

[TRAIL TAILOR]

I also wished I would have seen the CB antenna thing before HIH! I ordered it along with my diff drop last night!

Shipped today A! Thanks

J

 

[phatdragon]

Hey Jason,

When do you think the recovery points will be back in stock?

 

[TRAIL TAILOR]

Hey Jason,

When do you think the recovery points will be back in stock?

They will be here in about 10 days. The old style, will be available a day or two after that and about another week for the soft shackle /radius eye style.

J

 

[phatdragon]

They will be here in about 10 days. The old style, will be available a day or two after that and about another week for the soft shackle /radius eye style.

J

Thanks I'll keep an eye on the site. Love the sliders BTW.

 

[TRAIL TAILOR]

Thanks I'll keep an eye on the site. Love the sliders BTW.

@phatdragon just got a call from the laser cutter and they are ready. They will ship tomorrow, So reduce the lead times about a week.

Yes, my laser shop runs 24/7 ....

J

 

[benc]

Several have asked if I will be making my 100 bumpers I just made. Short answer is not anytime soon. So @benc (Dissent) will be the one I will continue to push inquiries to. Ben has been very gracious in referring and ordering my smaller parts for his customers and custom build offerings and I truly appreciate it. As you all know I take care of who takes care of us. Thanks Ben.

I've been struggling with a dislocated ribs injury since early this year. It's better, but every time I think I'm healing up and try to lift something over 100# or more it flares back up for several more weeks. It has been really hard for me in the shop to isolate projects and refuse to make certain products. I'm getting older and just need to get over the fact I can't walk around with 150# under one arm anymore.

So I will continue to focus on smaller parts and pieces and sliders only when I feel healthy enough. Right now sliders are off the table. Need to recoup a bit from the last run of 30 sets. I truly appreciate the continued support, referrals and orders we receive.

Jason

Thanks for the mention and kind words!
We definitely recommend anyone going offroad at all get at least a set of your lower control arm skids along with the shock guards! Keep up the good work.

 

[TRAIL TAILOR]

I was commissioned by @ga12r1 to make a direct bolt in fuse block bracket. Well here it is.

Here is the prototype. It will hold 4 different BlueSea panels (5026, 5025, 5029 and 5028) two 12 and two 6 circuit models and a spot for a Bussmann breaker as well. I'll make the first one from 1/8" aluminum and if I don't like it I'll bump to 3/16". Plenty of room under the hood too.

Yep... the oil dipstick is still accessible.