Shackleton - The Intrepid Explorer

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Engine is back from the builder and a livery of 12H-T blue is being applied. The crossover pipe looks stunning and the injector lines were powder coated black.

Block on Tailgate.jpg


Engine Main.jpg


Engine Blue 1.jpg


Engine Blue 2.jpg


Head Being Painted.jpg


Cross Over Pipe.jpg


Injector Line.jpg
 
Meanwhile in Idaho, BIL and his trusty helper are continuing to prep the interior for sound deadening. He also chipped out all the Bondo that Bondo Bob applied. We thought a patch panel would be required, but a hammer and dolly may fit the bill. After body work, it goes to Maaco for paint.

Assitant Helping.jpg


Gutted Interior.jpg


Bondo Bob.jpg
 
Very cool build. Just now seeing this thread and the first thing that pops out is y’all are “planners”. Well thought out and should go really well. Having a plan is a bit foreign to me as I typically “wander” through my builds :). I’ve done a few conversions like this and glad to offer any “learnings” if needed.
Good luck and I look forward to following along.
 
Very cool build. Just now seeing this thread and the first thing that pops out is y’all are “planners”. Well thought out and should go really well. Having a plan is a bit foreign to me as I typically “wander” through my builds :). I’ve done a few conversions like this and glad to offer any “learnings” if needed.
Good luck and I look forward to following along.
We welcome any and all feedback. The tidbit about mechanical linkage for the transfer case was welcomed...
 
Nice build plan, following!

I'm interested to see how the Vinyl flooring installs and fits, I've been tempted to switch to that from carpet. If someone made a replica of the stock setup Toyota/Landcruiser logos it's would be a no brainer! :)

Interesting Aux tank as well, haven't seen that tank before!
 

Users who are viewing this thread

Back
Top Bottom