LCMoneyPit
SILVER Star
Wow, looking great! Starting on the painting tomorrow?
rear body mounts (6 Viewers)
- Thread starter xtiaan2000
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2,382
Gotta do some planning with that. I guess need a paint booth type thing. gonna start with the undercarriage to get some idea on how this stuff lays out. Then move into the areas that are more visible.
Still got to clean/sand/clean before i get that paint satifaction.
!
Still got to clean/sand/clean before i get that paint satifaction.
!
Yup, it will be worth the effort!
- Thread starter
- #2,384
Thanks
That’s what I keep telling myself!
Tomorrow I work on moving towards painting the undercarriage!
That’s what I keep telling myself!
Tomorrow I work on moving towards painting the undercarriage!
- Thread starter
- #2,385
That’s what I am looking at to sand w 300grt tomorrow. :
At least it’s Stil on a rotisserie! I can only imagine the level of sanding when it’s on just a cart!
At least it’s Stil on a rotisserie! I can only imagine the level of sanding when it’s on just a cart!
- Thread starter
- #2,386
Cool
So cool to step back and look at all the work you've done to just the underneath, floor pans, rockers and that whole back end thing you did. You got the rest of this.
RUSH55
SILVER Star
Those rear body mounts. Full circle.
- Thread starter
- #2,389
So I sanded 320 all the areas that I want to paint- undercarriage, floor, ceiling, aBcD pillars, dash and firewall.
Gonna wash and go over again w a scuff pad and wash again.
Hasn’t been too terrible, all this sanding.
Gonna wash and go over again w a scuff pad and wash again.
Hasn’t been too terrible, all this sanding.
- Thread starter
- #2,390
Question
Do I need to worry about over spray? I figure when I come back to do the outside I will tape all the areas that have already been painted, and just paint over the previous over spray.
Do I need to worry about over spray? I figure when I come back to do the outside I will tape all the areas that have already been painted, and just paint over the previous over spray.
RUSH55
SILVER Star
Probably so with areas you already finished and don’t want to get overspray on.
- Thread starter
- #2,392
This is my first coat so I have no worries about already painted areas.
- Thread starter
- #2,393
Okay so I think I have a good option in the booth. Gettobfabulaous.
Now I have been cruxing on the gun thing. I am hoping that a gauge on my compressor is bad.
Compressor gauge was set around 30lbs and then at the pot I was shooting for a 4-10lbs of pressure. Every time I hit the air on the gun it zeroed out. Kept messing with the tank gauge and it would zero out as well. I have a 5hp compressor.
These are the times when I live next door to, you know, those guys!
Now I have been cruxing on the gun thing. I am hoping that a gauge on my compressor is bad.
Compressor gauge was set around 30lbs and then at the pot I was shooting for a 4-10lbs of pressure. Every time I hit the air on the gun it zeroed out. Kept messing with the tank gauge and it would zero out as well. I have a 5hp compressor.
These are the times when I live next door to, you know, those guys!
- Thread starter
- #2,394
Shenanigans!!
Next time I should be a little more aware of how this all goes.
I’ll let you know as all unfolds, don’t ya know!
Next time I should be a little more aware of how this all goes.
I’ll let you know as all unfolds, don’t ya know!
- Thread starter
- #2,395
Stil trying to figure out a spray strategy while I’m getting high on paint fumes!
I never did ‘huffing’ when I was a grom so I’m not sure how I’ll respond. Will I remember how it wanted to proceed or will I want to ask Alice, softly spoken?
I never did ‘huffing’ when I was a grom so I’m not sure how I’ll respond. Will I remember how it wanted to proceed or will I want to ask Alice, softly spoken?
- Thread starter
- #2,396
OH s***!
Almost missed this!
It’s a full on water sucking gap on both sides!
What am I going to miss that is as glaring as this?
Weeeeeee. What a ride!
Almost missed this!
It’s a full on water sucking gap on both sides!
What am I going to miss that is as glaring as this?
Weeeeeee. What a ride!
Run a 3/8" airline and a big regulator at the compressor.
You will be at the limit of that little compressor to paint a car.
PabloCruise
SILVER Star
Black IS a color!!!For a second there I thought you were thinking of painting the doomermoblie a color.
- Thread starter
- #2,399
CRUXING
Set the gauge at 45 at compressor (with the tank pressure at 120)
Then I set the gauge on the pot, which I imagine runs the gun pressure, at 8lbs.
Hit the trigger and both the pot and compressor gauges zero out!
What am I doing wrong!!!! I'm dead in the sand!
Have I set the hoses up wrong? What gives?!
Set the gauge at 45 at compressor (with the tank pressure at 120)
Then I set the gauge on the pot, which I imagine runs the gun pressure, at 8lbs.
Hit the trigger and both the pot and compressor gauges zero out!
What am I doing wrong!!!! I'm dead in the sand!
Have I set the hoses up wrong? What gives?!
Last edited:
bobm
WTF, WTF, WTF!!!!
Any air coming out of gun??? Something not plumbed right!! Can you put a male connector on in front of gauge and plug set up into quick disconnect??
