rear body mounts (1 Viewer)

[RUSH55]

Got some further beta and am changing things.

What did you find???

 

[xtiaan2000]

I was bummed at the fact that I was going to cut the trans tunnel especially when Mark’s Adapter was supposed to keep it in the stock location.
Talked with Oren at AA and he said he had another bell housing that replaced the stock bell and bolted the H55 to the LQ4. No adapter.

I had remembered that Scrappdaddy had used only one bell not a bell housing and adapter. So wonderfully he gave me the part number 712532 and it was the same as what Oren was suggesting. That is my new path.

Not in stock until middle to end of November

I have concerns because Oren said that the input shaft (shaft extending from the front of my transmition?) won’t need adapting. The stock bell house is a different length then the bell house he is suggesting. By at least an inch.

Guess I’m going back to scrappdaddy to cross reference!

 

[RUSH55]

Doesn’t it just need an extended pilot bushing?

 

[xtiaan2000]

I am hoping so. I am guessing that a pilot bushing is where the input shaft joins the back of the engine.

 

[xtiaan2000]

ICT Billet!!!

Oooooo. So cool! AC bracket and steam port.

 

[RUSH55]

Oh yeah baby!

 

[scrapdaddy]

Listen to the guys at AA, they have done a ton of these swaps. Get their bellhousing with the centerforce clutch and the correct flywheel/pilot bushing. You'll be fine. The trans bolts right up to the bellhousing, no other adapters needed.

 

[xtiaan2000]

Another cool which fits quite nicely

 

[scrapdaddy]

Sanderson, yes.

 

[bobm]

PURTY . Never seen headers with that much room + easy install???

 

[RUSH55]

PURTY . Never seen headers with that much room + easy install???

Right? He’s got even more room considering there’s some strips of ~1/2” thick wood covering the exhaust ports.

Moving right along X!

 

[Ol Yeller]

I’m excited watching this all go down, awesome!

 

[xtiaan2000]

I have to figure what to do now since the bell housing is not available til end of November.

I am thinking front seats.

Needs-
Full folding forward and rear
Seat heaters
Inside arm rest
Seat belts
And as svelte as possible.

Anyone got any pics?

 

[scrapdaddy]

Seat heaters

I thought you were Cali. not Canada.

 

[RUSH55]

What’s your fuel system consist of @xtiaan2000 ? Will you be using the stock 80 tank, or your big tank from RBM? Do you have your pump system worked out yet?

 

[xtiaan2000]

Went to Mosely Motor Sports for that. Gonna use the bigunn tank with an in tank pump.

 

[xtiaan2000]

Cali it is Scrappdaddy. I spend a lot of time in the snow, but when I drive naked around town here I like to have warm buns!

 

[xtiaan2000]

Plus it’s a lot harder to coax her clothes off if she isn’t warm!
It not as fun being the only one with no clothes on!

 

[scrapdaddy]

My Man!

 

[xtiaan2000]

Gotta cool things off!

Gonna be ready, gdm it!