Project LandROC

[Mcgyver24]

Day 123

Took the bumpers to the media blaster to get cleaned up. Then I laid down two thick coats of DP90, almost ready for some U-Pol Rapture.

 

[Mcgyver24]

Days 124 & 125

I got the rest of the parts cleaned up from the media blaster. Next, I laid down two coats of DP90 and then two coats of SEM single stage hot rod flat black. Then I finished the bumpers off by prepping them and then spraying them with two coats of U-Pol Rature, they are finally done!

 

[SHUSH]

Just read this whole thread......im speechless (and one eye is a little twitchy)


and sad it isn't done!!!! it's gonna be unreal

 

[Mcgyver24]

Day 126a

I applied some Xpel (headlight protection / blue tint) on my fog lights, see picture below (left untreated / right treated). Next I install the lights on the bumper and mounted it to the frame using all factory bolt locations.

Then I installed the running boards, I used some left over fender welting so they would not scratch the paint. Next I bolted on the windshield bumpers and latches.

 

[Mcgyver24]

Day 126b

Continuation of day 126.

 

[gwalt584]

Glad to see it back to the top

this is one of my favorite builds. Glad to see you back to the top.
Gary

 

[duffontap]

@ 77TPIFJ, I bought my kits here...

U-Pol Raptor Truck Bed Liner Kit - TP Tools & Equipment

The whole build is absolutely amazing. How many Raptor kits did you end up using? JD

 

[s800]

learning a lot... thanks for the thread!

 

[Mcgyver24]

Thanks for all the support fellow Muders!

@duffontap, I bought 3 kits total and have a ½ a kit left. I most likely will use the all of them because I still have all the stereo components to do still.

 

[Cruisertime]

SCHWWEEEETTT!!!

Lets hear a video of it running!

 

[Mcgyver24]

Nuts & Bolts

I periodically receive emails asking me for by Nuts & Bolts list, so I decided to attach it to my thread. FYI, I currently completed over half of Project LandRoc and I have no where near used half of the nuts and bolts I ordered. I think I ordered around 25% to much, better to have extras then to run out.

 

[Mcgyver24]

Day 127a

Finally got the rear bumper fully completed and assembled and now it’s ready to be installed. Check out the hide-A hitch with the IROC license plate holder. Then I installed in some new seat belts from CCOT.

 

[Mcgyver24]

Day 127b

Day 127 continuation.

 

[jim land]

beau travail
icon quality and more

 

[Mcgyver24]

Day 128

Installed the rear bumper using eight 9/16 grade 8 bolts. Everything lined up perfect and is solid as a rock. The last picture shows a 30” tire and wheel combo, it is sure going to look good with a 37”. Thanks again everybody for all the support, it keeps me motivated!

 

[G-Cat]

Love finding a build thread this deep...surescribed.

 

[cult45]

So much attention to detail! Keep going mate..

 

[Mcgyver24]

Day 129

I installed the freshly painted grill and placed the old emblem on for now (ordered a new one already). Then I mounted the new seat / subwoofer support.

 

[Mcgyver24]

Day 130

I finally got around to blotting on Bilstein shocks on four corners.

 

[whats the deal]

Are those the MAF U-bolt flip kits?