Thanks everyone. I appreciate the feedback.
Part-Time Conversion on the mind? (2 Viewers)
- Thread starter cruiseroutfit
- Start date
-
- Tags
- aisin conversion
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #102
As noted any 79+ hub will fit. With a heavy 80 build I'd seriously consider and recommend a HD hub build, i.e. AISIN with HD internals such as our smooth bodies.
If black isn't your dial preference, we have other colors too!
If black isn't your dial preference, we have other colors too!
- Thread starter
- #103
Bump. We've shipped out a few dozen of the part-time conversion kits and loose t-case spools. Feed back has been a bit on the quiet side, I'd love to hear how they are working out 
Maybe I missed it some where but can you just run hubs and use the diff locker instead of spool?
Only works halfway as the front driveshaft will still spin.
Does it not spin with the spool instead of diff?
I was under the impression the spool replaced the transfer case diff simply locking it and spinning both drive shafts.
- Thread starter
- #108
With the spool your front shaft won't be under power (spinning) until you engage the CDL button, it now becomes your 4WD button.
I just watched an install on YouTube. I am new to the fj80 I just picked one up on Sunday as a replacement for my fj62 that was totaled. I have never seen the inside of the case. Now it all makes sense I was thinking the locker was in the diff now I understand the function. I will be calling you for a kit real soon!
- Thread starter
- #110
Nice prices. I spent more and have avm's..
- Thread starter
- #112
Nice prices. I spent more and have avm's..
Sorry to hear
We can always hook you up with the AISIN's
Yup you're on my radar for when I eventually upgrade. Probably around the same time I service the axle.
Where did you get avm , it is 390$ all overNice prices. I spent more and have avm's..
I’m in CO, so I’ll leave it at that. But It was a few years ago that I converted to part time. And it appears as though they don’t sell them anymore which makes sense.
I will be ordering mine soon. I talked to Bryce last week and just have to pin down my ABS reluctor rings and relocate kit.
Drivelines came back today with cv and it still has a little shake when do you open in the morning?
- Thread starter
- #118
8:30, we can ship tomorrow for delivery as soon as Wednesday too!
Will Van
GOLD Star
Hey @cruiseroutfit! Just sent you an email about the Part-Time kit!
LC4LIFE
Supporting Vendor
I will be doing this one of these days, but I am not really interested in replacing the front axle's. Do the instructions have the spec to get the second groove machined?
