Ornch (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

First drive outside of CA with my pig and it was at 3am on Gila Bend in AZ. I was in the #3 doing 70-75 and a slew of tractor trailers started passing us like we were not moving. Not used to that when the limit in CA is 55mph for trucks. Literally hauling.
 
@Pigeaten stopped by to pick up the old drivetrain and see progress.

Pete and I got the rest of the parts in epoxy and high build today.

PXL_20240517_191909193.jpg
PXL_20240517_191918020.jpg
PXL_20240517_191920422.jpg
PXL_20240517_191929327.jpg
PXL_20240517_191937287.jpg

PXL_20240517_191955119.jpg
PXL_20240517_192020204.jpg
 
If time allows next week Tony and I will assemble the drivetrain, install and set all the mounts. Then pull it out to go back for paint and the frame to powder.

New connect and cruise GM Performance package LS3/6L80E with a HF2A tcase with part-time and standalone CDL harness. 430HP at the crank.

Jason
TT



1715982423923.png
 
90% of woman wearing yoga pants don't do yoga. 100% of men don't care.
Wait, what? I just got back into this thread and this was the post it took me to.
I guess I have some ketchin up to do...
 

Users who are viewing this thread

Back
Top Bottom