Motor mounts and brackets?

[Anvilfire68]

I will be converting my 1970 FJ40 back to a straight 6 F.5 from the Chevy 327 that's currently in it. I do not the original motor mounts, any tips on which company sells good mounts and brackets, both motor and frame? I've checked SOR but was wondering if any other company has a quality product that I could look into? Any help and advice is much appreciated.

 

[B y r o n]

You can try looking at eBay.

 

[John McVicker]

Rock Auto has motor mounts for 60’s, not sure about 40’s.

 

[Pura Vida]

I had to buy motor mounts recently on eBay, and that worked fine for me


@ToyotaMatt do you have anything?

 

[Dizzy]

For the used steel parts, Classic Cruisers, Cruiser Corps.

For the soft parts, use the updated style, post '76, up front. On the back, I used some SOR hockey pucks and Grade 5 1/2-20 Hillman bolts and drilled it for a cotter pin - it was close to the original M13 fine pitch in OD and thread root diameter.

 

[ToyotaMatt]

I will be converting my 1970 FJ40 back to a straight 6 F.5 from the Chevy 327 that's currently in it. I do not the original motor mounts, any tips on which company sells good mounts and brackets, both motor and frame? I've checked SOR but was wondering if any other company has a quality product that I could look into? Any help and advice is much appreciated.

I had to buy motor mounts recently on eBay, and that worked fine for me


@ToyotaMatt do you have anything?

Rock Auto has motor mounts for 60’s, not sure about 40’s.

i have exactly only 2 NOS ones here .........

stand by for pics

comes with ALL new OEM install hardware too bolts nuts washers japan goodness !

 

[ToyotaMatt]

I will be converting my 1970 FJ40 back to a straight 6 F.5 from the Chevy 327 that's currently in it. I do not the original motor mounts, any tips on which company sells good mounts and brackets, both motor and frame? I've checked SOR but was wondering if any other company has a quality product that I could look into? Any help and advice is much appreciated.

I had to buy motor mounts recently on eBay, and that worked fine for me


@ToyotaMatt do you have anything?

Hey fellows and female owner operators too in fact !


Sorry I’m late busy Tuesday night here at the LAB


I have 2 Nos 12361-60022. Mounts


Both include all new oem
Mounting hardware of course ..

They have been sleeping in my outbuilding #3 fir long time

Perfect condition ,

Well cosmetically I can’t say ….


Mechanically perfecto !

words of wisdom here :

CHINA KNOCK offs clone are rampant on ebay don't even think about getting your feelings hurt there doing something silly to save only :

 

[Anvilfire68]

i have exactly only 2 NOS ones here .........

stand by for pics

comes with ALL new OEM install hardware too bolts nuts washers j

i have exactly only 2 NOS ones here .........

stand by for pics

comes with ALL new OEM install hardware too bolts nuts washers japan goodness !

I'm not sure what NOS means? Is it new on shelf? I checked your website, which is very well made but was able to find mounts and brackets.

 

[Anvilfire68]

Rock Auto has motor mounts for 60’s, not sure about 40’s.

Thank you for the heads up, for the 40 they only have the front mount available.

 

[ToyotaMatt]

I'm not sure what NOS means? Is it new on shelf? I checked your website, which is very well made but was able to find mounts and brackets.

PM sent

thanks

 

[B y r o n]

I'm not sure what NOS means? Is it new on shelf? I checked your website, which is very well made but was able to find mounts and brackets.

NOS = New Old Stock

 

[Anvilfire68]

NOS = New Old Stock

Thank you sir.

 

[macdaddy59]

I have some of the frame mounts. If you need them PM me.

 

[65swb45]

I have the frame mounts and the cushions in Burbank.

www.marksoffroad.net

 

[Anvilfire68]

I have the frame mounts and the cushions in Burbank.

www.marksoffroad.net

Hello Mark, how much for all the parts needed to mount a F 1.5 in a 1970 FJ40?

 

[WarDamnEagle]

Hello Mark, how much for all the parts needed to mount a F 1.5 in a 1970 FJ40?

You will probably need to phone him if you want a quick response.

 

[3_puppies]

IIRCC the issue with newer isolators in older rigs is the boss in the new isolator. the older frame mount didn't have a recess for the boss to go into.

 

[65swb45]

IIRCC the issue with newer isolators in older rigs is the boss in the new isolator. the older frame mount didn't have a recess for the boss to go into.

A very good point Paul. Almost never gets discussed. Especially in the aftermarket, mfgrs often vary on the boss height. Some fit in the recess in the ears just fine; others need to be ground down.