I'm pulling the motor to change all the seals and gaskets. I need to get the C/S pulley nut off.
I have a 46mm socket, and I've hammered on it with an impact gun. No luck.
I put a breaker bar on it and bumped the starter. It doesn't look like it's budged even a little.
Im new to the 2F motor, but I've never had this much trouble getting one of these off...so I'm inclined to believe I'm doing something wrong, and don't want to break anything. I already have enough to work on with this 40.
Any pro tips or hints would be greatly appreciated.
Thanks!
I have a 46mm socket, and I've hammered on it with an impact gun. No luck.
I put a breaker bar on it and bumped the starter. It doesn't look like it's budged even a little.
Im new to the 2F motor, but I've never had this much trouble getting one of these off...so I'm inclined to believe I'm doing something wrong, and don't want to break anything. I already have enough to work on with this 40.
Any pro tips or hints would be greatly appreciated.
Thanks!