H55 and Transfer Case Value - Please (1 Viewer)

[umpqua]

I'm headed the diesel way (1HDT) and will be parting out my H55 transmission and FJ62 transfer case. The transfer case is original to the '88 truck. The H55 has ~ 60K.

Can you please provide your best estimate on the value of the parts?

Thank you......

 

[mongoose2231]

I'm headed the diesel way (1HDT) and will be parting out my H55 transmission and FJ62 transfer case. The transfer case is original to the '88 truck. The H55 has ~ 60K.

Can you please provide your best estimate on the value of the parts?

Thank you......

I think an h55 can be had new for anywhere between 1800 to 2500 depending on the discounts and what not. I think that's what i read around the forum for the most part. T-cases can be had for a couple hundred when used and not rebuilt. So go from there.

 

[LAMBCRUSHER]

that paper weight ain't worth the soap youd need to wash it off. tell ya what, I'll take it to the junkyard for 20 bucks.

 

[roma042987]

vacuum tcase I guess? Was it rebuilt when h55 was installed?

 

[umpqua]

If you mean if it's operated by solenoid then yes. No, the case was not rebuilt.

 

[4Cruisers]

The FJ62 transfer case has bearing-supported output gears, older split cases used bushings - not as good. Using new Toyota parts to convert from vacuum to manual front drive engagement runs to $150 to $200 - I found that used parts are hard to find.

 

[mongoose2231]

I would eBay it with no reserve starting at a price that you think is right, bearing in mind what I said earlier, and say no shipping. local pickup only. U may also want to maybe keep it as spare if you have the space. Just a thought.

 

[NookShneer]

The FJ62 transfer case has bearing-supported output gears, older split cases used bushings - not as good. Using new Toyota parts to convert from vacuum to manual front drive engagement runs to $150 to $200 - I found that used parts are hard to find.

You have the part numbers you used? Thinking of doing the same thing.

 

[4Cruisers]

You have the part numbers you used? Thinking of doing the same thing.

I'm at my place in Nevada until late tomorrow but will take a look in the bag and my parts order e-mail to Cdan when I'm back. But here's what I referenced to get my order ready (courtesy @rick_d and @cruiseroutfit):

Cruiser Outfitters

 

[umpqua]

Thanks everyone for the input. First option is to sell local. I have a guy that's local that's interested in putting it in an 80. I'll see how it works out.

Thanks again.