FJ55 Reproduction seal kits from Australia (6 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Received my kit today, haven't opened it up and checked it though.
Finally got time to open up the box(s) and do a check, no packing list, but here's what I got.
1705609846824.webp
 
Last edited:
Had a couple questions come up, thought I would address to everyone.

In the image below you can see that we ordered 12 of the RK356 kits, if you divide the quantity in that column below by 12, then you get the number of items you should have in your kit. The one exception is the items BC3500/BC3501/BC3502 you should get 2 each of those in your respective kits -- however, most of them are packaged 2 in a bag. Some are not, some are single in a bag. Regardless you should have 2 of them, just not two bags.... hopefully that makes sense.

1704762330665.webp


The other thing is the rear side windows. @bhoyles55 was nice enough to look back at all the emails and he saw that they had fitment issues back in July of 2023 and they did not have these in stock. Also the rear glass outside piece was not available -- that was the flocking issue.

Hopefully that takes care of most of your questions.....
 
Oops…. rqs355 is also bagged in pairs.

Got them all boxed up today, but lost power with the snow storm so I’ll ship out the last two boxes later this week…
 
I got the final shipment made today, so updated the spreadsheet. Lots of moving pieces here, so here is what adjusted. The final exchange rate was 1.44. on average, a little more than the 1.48 we had estimated so that added a few dollars. The FedEx shipping to you was adjusted based on what I had previously estimated and the actual. So those of you that agreed to ship together had a much smaller adjustment than others. Also you all in Southern California, shipping was a lot more than anywhere else... This is a big chunk of the change, as most of you received two packages for the kit. Most of the estimates were $25 for shipping, and they were closer to $75-$125. The shipping price from AUS to Houston was adjusted for everyone, that with the exchange rate change and the sharing of the missing kits was about $40 per kit.


Here is the results of what everyone owes me.

@61twpw $50.64
@POTATO LAUNCHER $156.05
@samc2447 $145.66
@Ry24000 $122.89
@Bwrmoto $96.93
@Lifelong40Fan $90.76
@DSP979 $21.70
@mmcinnis $97.76
@mike_az $65.79
@bhoyles55 $63.68
@Tomba $62.76
@WartHog73 $63.4
@Owyhee Jackass $92.76
@joesfj40 $147.79
@MudDauber $122.20
@Grease Cruiser $97.89
@Hobbs81 $160.79
@LCMoneyPit $103.37
 
Just sent mine through PayPal. Thanks again for doing this
 
Payment sent through Venmo. Thanks for doing this K.
 
I got the final shipment made today, so updated the spreadsheet. Lots of moving pieces here, so here is what adjusted. The final exchange rate was 1.44. on average, a little more than the 1.48 we had estimated so that added a few dollars. The FedEx shipping to you was adjusted based on what I had previously estimated and the actual. So those of you that agreed to ship together had a much smaller adjustment than others. Also you all in Southern California, shipping was a lot more than anywhere else... This is a big chunk of the change, as most of you received two packages for the kit. Most of the estimates were $25 for shipping, and they were closer to $75-$125. The shipping price from AUS to Houston was adjusted for everyone, that with the exchange rate change and the sharing of the missing kits was about $40 per kit.


Here is the results of what everyone owes me.

@61twpw $50.64
@POTATO LAUNCHER $156.05
@samc2447 $145.66
@Ry24000 $122.89
@Bwrmoto $96.93
@Lifelong40Fan $90.76
@DSP979 $21.70
@mmcinnis $97.76
@mike_az $65.79
@bhoyles55 $63.68
@Tomba $62.76
@WartHog73 $63.4
@Owyhee Jackass $92.76
@joesfj40 $147.79
@MudDauber $122.20
@Grease Cruiser $97.89
@Hobbs81 $160.79
@LCMoneyPit $103.37
Thanks again Kelly, sent via PP
 
Paid $122.89 via. Venmo. Thanks a million
 
@2fpower I don't see my name on that list.
 
PayPal sent.
 
My wife says I am too trusting -- that I should have got all these payments first, then shipped them out -- I love to prove her wrong!


Got some updates from AUS.

In regard to the outer tailgate seal....

Yes, we held off on the outer tailgate belt because we found out that there are 2 variations.

in regard to the rear side windows....

The Wagon side seals are under development still.

In regard to the tailgate seal...

The tailgate has been delayed until the beginning of February.
 
With the exception of @onemanarmy , everyone should have received their boxes over 30 days ago. I have not heard of any missing parts, or extra parts, so that is wonderful!! I was worried that someone would be missing something, and what we would have to do.....

I received an update on the rear seals ... they should be in stock in a couple weeks.

I went through my PM's and here is what i have for who signed up for the rear seal. I am sure I missed some folks, so please let me know who I missed.

@LCMoneyPit
@greenbeast
@Megadoomer
@Lilgreen77
@faeriej55
@MudDauber
@joesfj40
@mn12
@Grease Cruiser
@cjmoon
@theSherpa
@DEW1
 
With the exception of @onemanarmy , everyone should have received their boxes over 30 days ago. I have not heard of any missing parts, or extra parts, so that is wonderful!! I was worried that someone would be missing something, and what we would have to do.....

I received an update on the rear seals ... they should be in stock in a couple weeks.

I went through my PM's and here is what i have for who signed up for the rear seal. I am sure I missed some folks, so please let me know who I missed.

@LCMoneyPit
@greenbeast
@Megadoomer
@Lilgreen77
@faeriej55
@MudDauber
@joesfj40
@mn12
@Grease Cruiser
@cjmoon
@theSherpa
@DEW1
@2fpower - can you please add me for the rear seal? Appreciate it.
 
With the exception of @onemanarmy , everyone should have received their boxes over 30 days ago. I have not heard of any missing parts, or extra parts, so that is wonderful!! I was worried that someone would be missing something, and what we would have to do.....

I received an update on the rear seals ... they should be in stock in a couple weeks.

I went through my PM's and here is what i have for who signed up for the rear seal. I am sure I missed some folks, so please let me know who I missed.

@LCMoneyPit
@greenbeast
@Megadoomer
@Lilgreen77
@faeriej55
@MudDauber
@joesfj40
@mn12
@Grease Cruiser
@cjmoon
@theSherpa
@DEW1
Yes please
 

Users who are viewing this thread

Back
Top Bottom