MudDauber

What’s stopping you from cutting that left side loose, moving it back an inch or so to match the right side and welding it back into place?

Pulled all the grey Pig stuff outta the attic to sort it out. Looks like I'm only going to be able to make one signal work as two are SUPER rusted at the stem. The cup is full of hardware. The single mirror it has happens to be the passenger...

Those can be fixed. The threaded metal tube that holds everything together can be found at a hardware store in the lamps dept. The only 55 specific part is the plastic mount between the fender and the signal housing. The housings and lenses are...

Sent the 55/80 to paint today. Long time in the making.

Took the 'ol gal out for a stroll recently...

Can’t imagine having so much cash, I would forget I have a Landcruiser lol.

OK, I’ll add to the drama. the owner forgot he owned it for a couple years. Shop called several times. He finally remembered. I have a req in to see if he wants to part with it

While you’re underneath, take a look at things. Drips, birfs weeping, advancing rust, dangling wiring, wasp nests,… If you’re unwilling to get under the truck, something newer might be a better choice.

What a shame!

High net-worth guy. Sold it to a friend. Friend parked it under a tree. Bought it back from the friend Took it to a Jiffy Lube, they forgot to put oil back in it. 2F go boom. Here’s a pic of it back in 2020 (before being parked under a tree.)...

We all think alike, Mike 😜

I stole this idea from the "Yukon Jack" thread posted by @diesellibrarian. I saw the pic and said "Aha! That's so crazy that it just might work!" Seems that the PO had the same problem I was having. Problem is the metal tab that the thumb-button...

Popular color. How about hunting one up from a yard?

Good idea. I'm in Georgia, ran through Pick-a-part...need to find a Toyota Pick-up graveyard. I have thumbed through several FB Marketplace posts...will continue hunting for a viable used fender.

This is where we are with it as of now. To get it here was a ton of labor from the last photos back in July. This week we will work on the gutters and roof, hopefully.

New fender will start you down a rabbit hole if not careful. Before you know it, you’ve got a full frame off resto going on and on and on……

https://www.carparts.com/details/Toyota/Pickup/Replacement/Fender/1994/3404.html?TID=gglpla&origin=pla&gclsrc=aw.ds&gad_source=1&gad_campaignid=22521831243&gbraid=0AAAAADjOeBhCTl43voZNm9ovOBOc1ma8_&gclid=CjwKCAjw56zWBhB0EiwAdPOQOXDgjc-mB-TRzmdCHBm...

I made new rockers. They are pretty accurate to the original shape.

Thanks. Yeah, trying to avoid going the new route because a painted fender would lead to a painted hood followed by a repaint of the whole truck...that rabbit hole scares me 😳

I'd take that fender off and work it on a table with a body hammer.

Thanks Bob, I'll give it a go 💪

Trying to figure out how to haul some sheetrock on my suby. Spent 20 miniutes looking for some plywood for the roof. Completely forgot I now have a functional rig that easily fits a 4/8' sheet of anything... Finally putting her to use :)

Guys, A friend of mine suggested the sty might have some good suggestions on how to proceed on some body work. I have a 94 Toyota Pickup 4x4 DLX that's my daily. On Friday I hit a doe on the way to the office, didn't see it coming, poor...

Took mom out for a drive!