Hold on boys and girls this is about to get bumpy!
Builds Evolution of a Land Cruiser: My 80's build thread (3 Viewers)
- Thread starter jcardona1
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
good point((obviously) but do you want more after market upgrades available or do you wanna bitch about the very limited attention we (our trucks) get?
Last edited:
Finnyfam60
Driving miss daisy
I don't like contributing more to the back and forth, but come on booger! Your lack of logic is going against the common sense we have all come to believe you have (at least in fabbing up some sick stuff). We have stacked cash in front fab companies and machinists and it just isn't enough to get them to produce what we want (black box). I don't know the hf knuckle guy, but I bet if he had 100 orders a week he would be plastered all over this place!! Also, I haven't read a single post that says "geez we hate the fact joses badass rig is getting press." The issue is theft. A periodical article/write up on a build is not the same as an advertising campaign. And why the heck would anyone defend tg!? As originally stated, they steal designs and ideas from the vendors on here that we DO support and fab it from trashy Chinese metal by a 7 yr old with a 110 mig and then sell it here and it promptly fails (spent hours on the dusy last week dealing with their garbage axle on a buddies rig). Heck, they probably have all Of joses pics downloaded and are reverse engineering Brian's BA kit!
eager to wheel and/or fab with you sometime
eager to wheel and/or fab with you sometime
This thread can either...
a> get back on track with TECH
or b> get deleted
Your choice. Take the arguments to CHAT.
a> get back on track with TECH
or b> get deleted
Your choice. Take the arguments to CHAT.
Oooh, local bender! What did it run you with dies? Where from? @jcardona1
Cardona x2 on this , if possible could you post a pic on how you finished the trimming on the rad support
Thanks
Pretty sure he just left it open like I did.
Really no need to box this in other then vanity
-A
Really no need to box this in other then vanity
-A
Your fancy little LED's are crooked.
2fpower
SILVER Star
I
I did mine this weekend. Posted pictures on my FOO thread. Page 10
https://forum.ih8mud.com/threads/what-the-foo-is-this.674113/page-10
I bent the excess material and welded them together. Left plenty of holes for water. I felt that some additional protection was warranted for flying rocks.
I did mine this weekend. Posted pictures on my FOO thread. Page 10
https://forum.ih8mud.com/threads/what-the-foo-is-this.674113/page-10
I bent the excess material and welded them together. Left plenty of holes for water. I felt that some additional protection was warranted for flying rocks.
Thanks that really helped , chopping it off this weekend
- Thread starter
- #1,952
It was about $600 with the die. Dies cost damn near as much as the bender.
Mine is the same as Ammo's. Just cut off the metal then painted over it. Didn't see the need to seal anything back up in this area.
- Thread starter
- #1,953
And for those tuning in from the latest TG debacle, all is well in the world again. I'm not out to go vendor bashing or sue-crazy because I actually like TG. Hell, I just bought a set of their beadlocks a few weeks ago. They make lots of good parts at good prices and for what it's worth I've had more issues with RuffStuff steering parts than I have had with TG parts. I don't mind my pictures being shared all over the web, that's what they're for. But using them in ad for monetary gain without permission isn't cool no matter how small or silly the photo/product is. So I sent Joseph an email. He apologized, said they found the picture on some random blog site and didn't know who the owner was. Said they'd be interested in using my photos for future ads as well now that they know who I am. And in exchange for using my pic they gave me a hydro assist kit which I really needed. So hey, $300 in free merchandise works for me 
What else...Stealth Custom Series finally decided to make their F5 in a 17" so I sold the old wheels and bought them in gunmetal for the daily driver
And after a 2yr wait, my CA legacy plates finally showed up! Now there's really no confusing this truck.
What else...Stealth Custom Series finally decided to make their F5 in a 17" so I sold the old wheels and bought them in gunmetal for the daily driver
And after a 2yr wait, my CA legacy plates finally showed up! Now there's really no confusing this truck.
- Joined
- Jul 22, 2012
- Threads
- 582
- Messages
- 16,364
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
Looking forwards to seeing what you do with the rear. Also, should I be sending Trail Gear pictures of my 62? Because I want hydro steer too.
Quick, go start posting pics of my rig! I need hydro assist too!
I finally got mine after years of wanting, and they release the black n golds right afterwards 
maybe I'll swap em out! Nonetheless, hard to get me mixed up!
maybe I'll swap em out! Nonetheless, hard to get me mixed up!
nukegoat
Should have bought a Jeep
Jose, I just ran Fordyce today from eagle lakes to meadow lake (posting this from hotel WiFi). You would be fine. Nothing real unfriendly to a full size rig.
I did lose a tail light though.
I did lose a tail light though.
Finnyfam60
Driving miss daisy
^ oh boy, that sounds like fun! let me know next time y'all come through dixon!
- Thread starter
- #1,960
Nice! Did you run any of the winch hills? I hope you took some pics too
