I've been trying to diagnose a drive line "thunk" for the better part of a year - searched and checked the sway bar bushings...no problem. Looked for play in the u-joints...nothing. The "thunk" was pronounced in both forward and reverse after putting the car in gear and getting starting rolling - but not all the time.
Time for front brakes - off with the hub/rotor/caliper and inspect the bearings. Bearings are fine but how about this...
what happened to my splines? I'm going to guess that I've found the source of my "thunk".
Has anyone else found this - it's the driver side BTW. Passenger side is fine save for a little weeping from the CV boots.
Truck has 102k on the OD.
Thanks,
Time for front brakes - off with the hub/rotor/caliper and inspect the bearings. Bearings are fine but how about this...
what happened to my splines? I'm going to guess that I've found the source of my "thunk".
Has anyone else found this - it's the driver side BTW. Passenger side is fine save for a little weeping from the CV boots.
Truck has 102k on the OD.
Thanks,
Last edited: