Builds DRANGED's GX470 build/ownership thread (21 Viewers)

[runningdrew]

finished bump stop spacers v 1.0.
These are 0.25" x 2" with 0.5" hole (maybe 5/16 would be more perfect

bump stop spacers

• DRANGED
• Sep 26, 2018

bump stops and 0.25" spacers

• DRANGED
• Sep 26, 2018

bump stop spacer remaining thread metric

• DRANGED
• Sep 26, 2018

bump stop spacer remaining thread STD

• DRANGED
• Sep 26, 2018

bump stop with 0.25" spacer

• DRANGED
• Sep 26, 2018

Looks good, and they appear to have enough thread left to hold. Currently following all three threads where you've posted these spacers. You should list a retail price......unpainted, you know, for those interested.

(I wonder if they make industrial type, thick, washers, like a real big thick fender washer that would do the same thing...?)

 

[DRANGED]

Your lower control arm bushing are relatively soft and they move back and forth. Wheel torque going reverse push the wheel back a bit. You could adjust the caster to max. It would give more fender clearance. You do this by adjusting the rear cam bolt fully out and the front fully in.

That's good beta. I thought something was at play when drivetrain was engaged. this makes sense.
I got it alligned. The passenger rear caster plate is maxed out while driver rear is about half maxed. I figured with the caster angle of the strut tower that the puck probably exacerbated this and wondered if I could pull it back with less caster. But doesn't the car track better on highway with some caster?

At any rate. that's good beta and maybe i could lean over the tech's shoulder (cuz I know they LOVE it when I go in the back during my alignments and ask about setting the plates as you suggested..

 

[DRANGED]

Looks good, and they appear to have enough thread left to hold. Currently following all three threads where you've posted these spacers. You should list a retail price......unpainted, you know, for those interested.

(I wonder if they make industrial type, thick, washers, like a real big thick fender washer that would do the same thing...?)

As I posted in the leveling spacer thread,

"Ha, yeah I've got it multi-posted. Maybe I should just keep all the beta in one thread...sorry for the confusion. I'm answering each post as they come in...

I made them out of 1/4" plate steel."

It's probable something similar exists in industrial-landia, but I'm FAR from anything like a city or steel yards or anything a regular person can reliably get by going across town or to the industrial zone
So we gotta be a little inventive

I've got a buddy who builds crawlers and sometimes I score some of his scrap drops. That's where this plate came from.

Also, I've found a scrap pile behind the shop I get my welding gas from, I raid their pile simi-regularly...

 

[DRANGED]

@runningdrew reminded me I've cross-posted this beta in many places, so I'll keep the main info in my build thread. So here's the detail on how these spacers came to be.


Scrap 1/4" plate steel

I traced a 2" hole saw blade and tried a hole saw on the drill press, but it was a wood blade so I killed it. I'd also drilled out the center hole with a pilot hole on drill press.

So then I used the portaband and a cut-off wheel on an angle grinder to cut off the corners, then I theaded a 1/4 bolt in it and attached it to the drill and spun it whil knocking off the edges with a flapwheel on a grinder till I got it pretty darn round. I drilled out the center hole and painted it

yay fiddling with toolz!

I also have a scrap piece of 3/8" steel I want to make another set of spacers out of should I think I need taller.

 

[runningdrew]

I think all three places it's posted is relevant. I was saying I'm following with interest all three threads.

 

[DRANGED]

Friday morning's ominous sunrise ...

But all packed and ready to go camping for the weekend

We'd been watching the forecast and with two nights planned we thought we might (and ended up doing so) pull out day early.

So two nights reserved at Bobby Jo camp in the Needles district of Canyonlands, we and friends in their X ventured forth.

 

[DRANGED]

dropping in!!

"pull in back down...pull in back down" became the kids' chant, it was awesome

My wife, a backpacker at heart, walked in...

Coors and Bud hill

https://photos.app.goo.gl/MdgYWqu8rEEumpNs9

 

[DRANGED]

DuPont narrows ("squeezeplay per Wells and Massey)

and the errant attempts/scrapes by Schwarzenegger and those weary of the right wall...

A little roadbuilding at SOB

still managed to turn tighter on that one rock than i wanted to (got a little DA scrape)

... on that rock...

The kids were running!!

Camp was awesome

with immediate bouldering by the kids

Highball too! eek

 

[DRANGED]

Pooping Santa

Sunset through gunsight was awesome

Breakfast...

...was awesome!
camp again

Out that-a-way is the Maze... That's the plan for Thanksgiving week

We had a Where's Waldo session in the morning

With some weather afoot we decided to bug out a day early

 

[DRANGED]

But not without a quick hike to the joint trail

Where our friends from NavTek pulled in

Awe friends...

Always look for screaming-man-rock....

and a wet climb up SOB (turn a scosh wider next time
https://photos.app.goo.gl/bgQYfb7sCLfTwXDx6

But the rain really set in at the Silver Stairs

https://photos.app.goo.gl/k6JJGrPhK6nJx7Tw9

 

[DRANGED]

So Elephant hill was a little slick by this time
https://photos.app.goo.gl/MS8sk5Kpego8AV1NA
reset reposition that available rock and 'scend
https://photos.app.goo.gl/gGkAoLv1H3B3qagr5

I like the wide left line (with a sample size of 2
https://photos.app.goo.gl/vkvGkTK7RfspkSaYA

So by this time water was running pretty well and we got the E Hill waterfall in the pic with my buddy driving out

We pulled to the visitors' center pavement to air up

and i love the heckling flak I got in Chit Chat for having this pump,
BUT, the 88p put 10 PSI in 4 33's in 10 minutes, so there's that... for a bicycle pump.
It was a great trip, and while we're bummed we weren't in for the 2 nights, we're glad we got out when we did. We probably could've still made it out an hour later, but no regrets with our decision.

and only minimal requisite kid injury when playing on a downed juniper in camp

but the kid's tough... way tougher than I am!!!

 

[DRANGED]

I will say the lift vis-a-vis stock via the 3/4" puck leveler was noticeable!!

Last spring when we drove out the backside one-way from beef basin through elephant hill, I tapped/scraped the skid like 6 times and the hitch 8-9 times. On this trip doing the whole elephant hill loop I touched the mid plate twice and the hitch 6 times (rear aired to high, and maintained high with slow 4lo driving). I didn't do any wheel well videography of the sway bars in action or the bump stops. Maybe I can set that up on another local trail this fall. I'd really like to see those shots. But with one trail down post spacer, I'd say it's effective and being cautious of the bump stop concern mentioned ad nauseam previously, recommendable as a functional entry means of gaining a little clearance under the front skid plate.

 

[GXO]

I LOVE Elephant Hill. Next time I am in Moab will it you up.

 

[MaverickFiveO]

I picked up my GX with the plan of building it out by the time my daughter (currently 11 mo) is a few years old. I've been here in Utah for 13 years and have been eyeing the Maze District for about 11.5 of those. Thanks for the Needles trip report, and I will be eagerly watching for your Maze trip!

 

[subspd]

and i love the heckling flak I got in Chit Chat for having this pump,
BUT, the 88p put 10 PSI in 4 33's in 10 minutes, so there's that... for a bicycle pump.
!

Great little pump. I also rock it. I keep thinking about spending more but don't see the need. I did clip the stock hose and add a quick connect to it.

 

[DRANGED]

I picked up my GX with the plan of building it out by the time my daughter (currently 11 mo) is a few years old. I've been here in Utah for 13 years and have been eyeing the Maze District for about 11.5 of those. Thanks for the Needles trip report, and I will be eagerly watching for your Maze trip!

sweet!
Drop me a line if/when you head down this-a-way.

We've been in moab for 10, and had the GX now for 2, so now we can comfortably get to the places I threatened to take my Suby to, but now it's with confidence not exceeding comfortable capability
Yeah, the maze has been on the radar for a decade!! There's SO much exploring to do and now with comfort and confidence, we're psyched!!

Congrats on the wee nugget. We've got 2 now, 6&8. It sounds the cliche, but it's totally legit; It's crazy how quickly time goes!

 

[DRANGED]

Great little pump. I also rock it. I keep thinking about spending more but don't see the need. I did clip the stock hose and add a quick connect to it.

nice! That's a mod I'd like, common air fittings (all my current are NPTs). BTW, do you have a similar handle on other forums? suby speed or something similar in the roo world?

 

[DRANGED]

I LOVE Elephant Hill. Next time I am in Moab will it you up.

Yes!!

 

[CO_Hunter]

Thanks for posting that trip report. Brings back some great memories! We have been making annual trips over spring break to the Canyolands/Moab area for about 6 years, but missed last year.

One trip we hit the bottom of Elephant Hill right at dark and didn’t see the signs. Two of us made the tight switch back after multi point turns. We figured it out finally when it was our last guy’s turn who had a trailer. Talk about trusting us as spotters with flashlights. Spent the night at split top.

We started that trip going into the Doll house in the Maze, which was awesome. That was an epic trip and got to most camps well after dark.

Good chance I’ll be down that way the second weekend in Nov.

 

[DRANGED]

A

Thanks for posting that trip report. Brings back some great memories! We have been making annual trips over spring break to the Canyolands/Moab area for about 6 years, but missed last year.

One trip we hit the bottom of Elepahnat Hill right at dark and didn’t see the signs. Two of us made the tight switch back after multi point turns. We figured it out finally when it was our last guy’s turn who had a trailer. Talk about trusting us as spotters with flashlights. Spent the night at split top.

We started that trip going into the Doll house in the Maze, which was awesome. That was an epic trip and got to most camps well after dark.

Good chance I’ll be down that way the second weekend in Nov.

Awesome!! Epic E HIll in the dark w/o pull-in back-up (That chant is still in my head from the kids.. i wish I'd've recorded it. it's awesome And yeah, It blows the mind that people trailer that trail!! My buddy almost stepped off the edge when spotting me around that rock in the path on the upper pull-in back-up spot.

Drop me a line when you come back around. I'll play if I can, same to @Vlad (the impaler ! I'll come play if I can, or at least grab a cup-o-jo.

@CO_Hunter Are you coming to Moab or the Maze in November?
Our November Maze permit is 5-night (maybe a 6th on the way out) w/ shoulder days for travel; from 19-23.
IIRC we have 2 nights at overlook, 1 night at standing rock and 2 nights at the doll house.