Builds DIY FJZ80 Low Budget Turbo Build (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Blacked out the front end

80blackfront.jpg
 
Last edited:
Is there a single pic in this thread showing the Turbo setup?
 
I kinda meant with complete hardpiping installed. I'm guessing it's not done yet. I will check back to see how it all turns out. Good luck with the build
 
I saw your build first on the other forums. You will get way more info from there and most of the parts used for cheap. I would almost guess that a oem 2j fuel pump would drop in as well as some n/a or TT injectors

Untitled.jpg
 
Giddyup :D
 
:popcorn:
 
cool, sounds abit 1j, is it full stainless? keen to see some flybys once the pipes are carbon'd up. cant wait to get mine done.
 
And for reference, here is a dyno pull from my truck while stock. (153hp/219tq) Good baseline to compare with the turbo swap. The other pull on the chart is an overlay of my car I dynoed the same day.


Stock Cruiser Dyno


I'm curious why your HP is low at 153hp- is that due to the usual 30% driveline loss?
 

Users who are viewing this thread

Back
Top Bottom