BakerFJ
Benny Bodangus
I think about $350-400 from the local junkyard. They originally wanted more because they're airbag seats but the guy gave me a Christmas deal
COMPILED - 80 Series Seat Swap Thread (22 Viewers)
- Thread starter Box Rocket
- Start date
-
- Tags
- seats
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
COS80
SILVER Star
I need to upgrade my front seats. They feel good for a while, but after 12 hours or so, they start to hurt all over - thighs, hips, butt, ribs, back, neck....
First and foremost, I need to go lower, and higher is completely out of the question (and it appears most of these swaps resulted in the seat being an inch higher). The most comfortable factory car seat I've ever sat on were those in ~2013 Ford Fusions. I bet they could be had cheap, but who knows whether they'd fit?
What seat/bracket combos are confirmed to lower the seat base?
First and foremost, I need to go lower, and higher is completely out of the question (and it appears most of these swaps resulted in the seat being an inch higher). The most comfortable factory car seat I've ever sat on were those in ~2013 Ford Fusions. I bet they could be had cheap, but who knows whether they'd fit?
What seat/bracket combos are confirmed to lower the seat base?
Almost no oem seats will be lower than what’s already in the truck. You will have to go aftermarket such as schlee man or recaro and that gets pricey fast.
COS80
SILVER Star
I went and looked at my favorite car seat of all time today - the 13-20 Ford Fusion - and I think it will work. It's very tall as-is, but it's all air underneath, standing on long stilts. I think it could be chopped off and welded to the Corbeau brackets that come with their own sliders. Overall width is good - we have ~23" to play with, and these measured 20-9/16" at the widest part of the base.
I'm kicking myself, though, because I forgot to measure the slider width, so I'm going to have to go do it all over again.
I'm kicking myself, though, because I forgot to measure the slider width, so I'm going to have to go do it all over again.
COS80
SILVER Star
Today I went and bought the PS Fusion seat. The DS was power, and as such couldn't be moved forward to remove, plus it looks like the motor is all the way down between the rails, so it might not be a candidate. I'm going to get some better measurements and maybe do some chopping to see if it works. There were two guys pulling the manual seats out of the other Fusion at the same time.
COS80
SILVER Star
Looking good so far... the stock seat measures about 4.5" at the back. After subtracting the height of the bolster, the Fusion seat is only about 4" in the same area.
Does anyone here actually own the Corbeau brackets? I contacted them for dimensions, but they're not specific enough to really help. The height of that bracket will make or break whether this seat will work.
Does anyone here actually own the Corbeau brackets? I contacted them for dimensions, but they're not specific enough to really help. The height of that bracket will make or break whether this seat will work.
Does anyone have the width of the Planted bracket? I got a steal on manual heated seats out of a 2011 Jetta and I don't really have fab skills so I expect my easiest course here will be Planteds and steel plates, just hoping to do some drawing and planning before I order the brackets
Edit: forgot to mention that these rails are 21" wide
Edit: forgot to mention that these rails are 21" wide
Last edited:
We hear alot about the Scheel-Mann seats, but has anyone given a go at the Huracan Premium Touring Seats? I have found zero reviews of them and curious if anyone is running them yet?
Tapage
Club 4X4 Panamá
Here ..
recently got them installed on Cleopatra .. ( vaven't update the thread yet .. )
Will do some of that there . .. with some pics ...
I would love to hear your opinion on install, fit and comfort.
How about a quick text impression--what do you think and how big (or small) are you? I'm having trouble finding anything about these that's not from the mfr or a reseller. I mean, nothing... Which is really odd. Google shows zero hits when I include the word 'review'
Tapage
Club 4X4 Panamá
Well ..
I'm 6'2" 190 lbs ..
They feel just right .. I got mine with lumbar support ( main reason for the update ) and I'm happy .. not " very " happy coz they are hot .. compared to the factory " cloth " ones which are very fresh IMHO ..
Tapage
Club 4X4 Panamá
Well, that's blaming leather for being leather.Any long trips with them yet, to assess comfort?
Took them in a short about 800 mile trip and they are super cool .. they hold you right, material is ( so far ) good other than bein not breathable .. they are perfect for the price tag ..
mudgudgeon
Resident galah
Yes, I looked at putting 105 series seat in mine.
The width of rails, the width of the seat base was a problem. Too much needed to be altered to make it worthwhile
It was easier to fit Audi seats than to fit 105 series seats.
100, 105, 200 etc are quite a bit wider in the cabin, and driver's compartment, so are the seats
Ah, mystery solved. I did see one Cruiser with the door panels modified--no pockets--to accommodate wider seats. Guy said the install was a real pain.
Did you wind up going through with this and write it up?
Huracan Group Buy Post, $1,000 discount…
forum.ih8mud.com
Huracan Fab Front Seat Group Buy - Now Live
*UPDATE 02 - MARCH 11 2025* ***GROUP BUY LIIVE - INFO BELOW*** (80 install photos, other vehicle compatibility, product reviews) Latest updates marked with * * ================================================ Would need four orders to get this price so, me and three others. MANUAL SEATS...
forum.ih8mud.com
Last edited:
Question from someone who's never swapped seats before...
Since there are aftermarket seat brackets already made to bolt into the 80--why make custom brackets from scratch, instead of attaching your new seat-of-choice (whether that's aftermarket or some other oem) to a Planted or Wedge bracket etc.? Wouldn't it be easier to (for example) make an adapter plate(s) if the holes don't line up? Clue me in here...
Since there are aftermarket seat brackets already made to bolt into the 80--why make custom brackets from scratch, instead of attaching your new seat-of-choice (whether that's aftermarket or some other oem) to a Planted or Wedge bracket etc.? Wouldn't it be easier to (for example) make an adapter plate(s) if the holes don't line up? Clue me in here...
