Looking good!
Here's my take on these.
And for paint, remove as much or as little as you want. Skipping the firewall will save you a few hours of work.
Here's my take on these.
That upper hard line can be removed. I ran a new hose up from the lower hardline that comes from the gas tank and plan to put a small breather on it and tuck it behind the washer fluid bottle, like @dbbowen mentions in the last paragraph of this post.What do y’all do with the convoluted line from the tank to the charcoal canister?
I am working through that now. I believe it will be very, very little since most of it is 3fe wiring. Only thing I see so far is the temp sensor (if you're keeping the stock gauge), but I am not done going through it all.How much of this engine harness remains?
That's pretty gnarly looking, but not aftermarket. Looks similar to mine.How much of this is stock?
And for paint, remove as much or as little as you want. Skipping the firewall will save you a few hours of work.