Nolan! Trevor from Sigep here, love the build! Been seeing pics over on IG and was browsing on the forum and saw your thread!! Crazy! Keep up the good work!
Builds Atnolan94 Land Crooser Build Thread
- Thread starter atnolan94
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Ha! That's crazy! Got the wife a LX 570, that's how I came across this website. Just threw on 275/60/20 AT3W's, but alas, will probly remain a mall crawler.
Looking great @atnolan94!
atnolan94
I'm Your Huckleberry
- Thread starter
- #225
I had the P0430 code that many here deal with. I read that the rear (downstream) O2 sensor is immediately after the catalytic converter, so often it is a false flag code where most shops would tell you you need new cats.
I swapped my passenger side one today. Don’t know a lot about how O2 sensors work, nor how they fail, but it certainly looks like it’s in bad shape!
I swapped my passenger side one today. Don’t know a lot about how O2 sensors work, nor how they fail, but it certainly looks like it’s in bad shape!
atnolan94
I'm Your Huckleberry
- Thread starter
- #226
I got my 1.25” spacers installed today that I bought from a fellow murder doing a SAS. I miss my offset with the 1.75” spacer but the clearances on the 315s are much better with these! If anyone wants my BORA 1.75” front and 1.5” rear, feel free to reach out. I will sell them for what I bought these used spidertrax for, $150. They worked perfect with the 285s and really give the truck a 10x better stance.
atnolan94
I'm Your Huckleberry
- Thread starter
- #229
Wow, it’s been a while! As of February 10, I have had the crooser for a year and it’s come a long way. I also rolled over 250k.
Since my radiator issue, I have had no cooling issues and really no major issues to speak of. The cruiser hasn’t needed much and did a great job getting me through the later half of deer season.
My biggest update over the past couple months is a set of DEPO headlights. WOW the output is 10x better than stock, but I still am planning on an HID projector retrofit.
Here’s some pictures over the last couple of months....I really need to paint my spare.....
Since my radiator issue, I have had no cooling issues and really no major issues to speak of. The cruiser hasn’t needed much and did a great job getting me through the later half of deer season.
My biggest update over the past couple months is a set of DEPO headlights. WOW the output is 10x better than stock, but I still am planning on an HID projector retrofit.
Here’s some pictures over the last couple of months....I really need to paint my spare.....
atnolan94
I'm Your Huckleberry
- Thread starter
- #230
For anyone on the fence on 315/75r16...
If you wheel the truck, I cannot express the amount of traction you gain with the monster contact patch these give you when aired down. On loose surfaces like mud, where I used to just slip and slide around, I have way more control over the vehicle. Hard surfaces are never a traction issue at all. With my pinch weld hammered back, some trimming of the fender liner, and aftermarket T bars with IM foam cell shocks rubbing is minimal. I get no rubbing on toad whatsoever, with minor inconsequential rubbing off road. They just roll over everything better than the 33s.
If you wheel the truck, I cannot express the amount of traction you gain with the monster contact patch these give you when aired down. On loose surfaces like mud, where I used to just slip and slide around, I have way more control over the vehicle. Hard surfaces are never a traction issue at all. With my pinch weld hammered back, some trimming of the fender liner, and aftermarket T bars with IM foam cell shocks rubbing is minimal. I get no rubbing on toad whatsoever, with minor inconsequential rubbing off road. They just roll over everything better than the 33s.
You sell those spacers yet?
atnolan94
I'm Your Huckleberry
- Thread starter
- #232
I did. About a day before @kelly saad offered to trade me a grille for them. Maybe the biggest regret of my life
Great build so far. Following along!
Saw those and heavily considered it, but the threads on the uniball, (IIRC?) and being second-hand steered me away. Let us know how they are though!
Eh, just realized the ones I saw were Nitros in the Classifieds anyway.
Holy hell... I just saw the ad. What a screaming deal.
