I hope this thread and your comments will keep me going on my project.
Here is some background I've had my fj40 for about 10 years drove it the first 6 months then parked it. Here is what I’ve done so far or started.
-front disk conversion got most of the parts need a Spindle rebuild Kit.
-the center channel was rusted out so replaced with 2x2 square tubing.
-replaced the drivers side floor.
-started the rear sill with some 2x2 square tubing.
once I get the body some what strait I'm going to start the frame.
like to move the rear axle back 3-4 inches and a SOA lift. rear disc brakes.
this pic is from 2005 at my parents house just put on the bling rims & tires.
Here is some background I've had my fj40 for about 10 years drove it the first 6 months then parked it. Here is what I’ve done so far or started.
-front disk conversion got most of the parts need a Spindle rebuild Kit.
-the center channel was rusted out so replaced with 2x2 square tubing.
-replaced the drivers side floor.
-started the rear sill with some 2x2 square tubing.
once I get the body some what strait I'm going to start the frame.
like to move the rear axle back 3-4 inches and a SOA lift. rear disc brakes.
this pic is from 2005 at my parents house just put on the bling rims & tires.
Last edited: