ARCHIVE 1/75-7/80 FJ55LG-KA FULL Accelerator Linkage W/ OPTIONAL HAND THROTTLE KIT FEATURE NEW YELOW ZINC CHOMATE PLATED Technical VIDEO Resource THREAD .....

[ToyotaMatt]

1/75-7/80

FJ55LG-KA

2F ENGINE

FULL Accelerator Linkage

W/ OPTIONAL HAND THROTTLE KIT FEATURE

NEW YELOW ZINC CHOMATE PLATED

Technical VIDEO Resource THREAD .....




​

 

[ToyotaMatt]

​

 

[ToyotaMatt]

 

[RUSH55]

Those look great!

Now….
how about the park brake cable accordion boot on the outside of the firewall?

 

[Ol Yeller]

I went back to find Matt’s wording but missed it...”everything on a FJ55 is a little bit different”.

Must be why we love them!

 

[gonzopancho]

I own 2 sets of those taillights. Looking forward to the LeD bulbs.

 

[ToyotaMatt]

Those look great!

Now….
how about the park brake cable accordion boot on the outside of the firewall?

can you post me a photos , part # or call out # and what microfiche slide its on ?

also ,

FJ55 or FJ40 or ?

thanks

im not 100% sure the exact part u refer to ......

 

[ToyotaMatt]

from the past
FJ55
FLASH BACK ......

​

 

[RUSH55]

can you post me a photos , part # or call out # and what microfiche slide its on ?

also ,

FJ55 or FJ40 or ?

thanks

im not 100% sure the exact part u refer to ......

FJ55

Best I can do for you is the diagram and pn# from Specter’s website

 

[ToyotaMatt]

FJ55

Best I can do for you is the diagram and pn# from Specter’s website

View attachment 2786649

View attachment 2786650

View attachment 2786651

in order to reproduce this part i would need a complete un altered original then CLONING can begin

i have a 1/79 FJ55 LG-KA here at the shope i take care of 24/7 and store it for a client too

ill take a lookie see and see if it has one ?


passenger side upper fire wall right ?


i have tons of samples boots of all kinds i have scooped up overe the years too well documented where they came from and what they fit too

many oem toyota also


fyi , i can start here too ?



maybe

 

[gonzopancho]

I’d buy several

 

[RUSH55]

That’s the one Thanks Gonzo!

 

[ToyotaMatt]

I’d buy several

View attachment 2786684

View attachment 2786685

That’s the one Thanks Gonzo!

i need a better quality close up photo please

like MACRO nice !

details matter here more then you can possibly imagine ...

thanks




like this :

STAINLESS STEEL #77358 RETAINER FUEL INLET CUSHION CATCH LOCK STRIKE GAS DOOR 1/79 -10/85 Part # 61824-90303 - VintageTEqParts.com

- STAINLESS STEEL 77358 RETAINER - FUEL INLET CUSHION - Part #'s 61824-90303 - Interchanges 68124-90302 - CATCH LOCK STRIKE...

vintageteqparts.com

NEW STAINLESS STEEL 77358 RETAINER Catch Strike for LOCK cylinder FUEL INLET CUSHION 61824-90300 / 61824-90301 CATCH LOCK STRIKE GAS DOOR 9/72-12/78 FJ40 - VintageTEqParts.com

NEW STAINLESS STEEL 77358 RETAINER FUEL INLET CUSHION Part #'s 61824-90300 / 61824-90301 CATCH LOCK STRIKE GAS DOOR PREMIUM QUALITY...

vintageteqparts.com

NEW ZINC PLATED Windshield Frame to Hard Top L Brackets 2pc LH & RH KIT w/ ALL Mounting Hardware of course FJ40 BJ40 65815 / 65816 - VintageTEqParts.com

- NEW ZINC PLATED Windshield Frame to Hard Top L Brackets - 2pc LH & RH KIT - INCLUDES ALL Mounting...

vintageteqparts.com

 

[WarDamnEagle]

Here's the part number FWIW:

46331C	BOOT(FOR INTERMEDIATE LEVER PULL ROD)
36371-60011

 

[ToyotaMatt]

Here's the part number FWIW:

46331C	BOOT(FOR INTERMEDIATE LEVER PULL ROD)
36371-60011

THANK YOU my warm mr. eagle

you always come thru for the greater good of the land cruiser community as a whole and have very much respect for that ............

 

[ToyotaMatt]

46331C	36371-60010	BOOT(FOR INTERMEDIATE LEVER PULL ROD)	1969/03 - 1970/06	FJ55	DISCONTINUED	DISCONTINUED
46331C	36371-60011	BOOT(FOR INTERMEDIATE LEVER PULL ROD)	1970/06 - 1980/07	FJ5#

NOW ...........

- to find a CLONABLE LIVE Specimen > ?




- can any one confirm if the sheet metal holein fire wall is round or oval ?

- then i NEED a Exact ID Inside diameter In MILLIMETERS ONLY , NO SAE Please .........

- USE a pocket chum caliper or digital one ONLY NO Tape measures or small rigid scale rules , there is little to NO ZERO room for error on a sheet metal hole related to a boot or grommet LIP SEAL u be suprizsed at the LOW free play tolerance that dose NOT exist in any way

- TOYOTA ONLY uses WHOLE Steps or Step increments like : 22mm , 23mm , 24mm etc

- never 1/2 or 1/4 mm steps .......fyi

- length approx. in mm of boot itself ?

- I know and assume it starts out fire wall side a larger diamiter , and CONES out to a tip much much smaller to seal a cable or rod at the end further out for sure .....




- Im gonna take a @3_puppies WAG and show examples ONLY pics

- Please tell me what's the actual closest example all images labeled A , B , C , D , E

thanks for any help \

kinldy matt

 

[ToyotaMatt]

EXAMPLE A

 

[ToyotaMatt]

EXAMPLE B

 

[ToyotaMatt]

EXAMPLE C

 

[ToyotaMatt]

EXAMPLE D