Guide to GX 460 Builds and Aftermarket Products (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Mawgie said:
@TX GX460, i think there may be a mix up with the Kaon links posted up top. The Kaon website shows a Light Cargo Roof Shelf (the tray style that hangs below and parallel to the roofline) and a Light Cargo Pet Barrier (vertical pet barrier parallel to and above the 2d row seat back.)

"Cargo Management / Netting:

The link for the Light cargo pet barrier points to the Rear roof shelf: Here is the link to the Light Cargo Pet Barrier:

www.kaon.com.au

Light Cargo & Pet Barrier to suit Toyota Prado 150

Light Cargo & Pet Barrier to suit Toyota Prado 150 / Lexus GX 460 - KAON
www.kaon.com.au www.kaon.com.au


Thanks for your efforts. I was unaware of the Kaon products and really like them.
Click to expand...
Thanks; fixing it now.
 
I'm seeing a lot of LED light swap-outs and would like to bump this so those of you who have replaced your incandescent bulbs, either headlights, taillights, running lights, interior, wherever, if they work, can you please post the product and link here?
I believe more and more people are going to be doing these mod's in the future so those who post their info, it would be very appreciated.+
Thanks to all of you!! 👍 :cheers:
 
r2m said:
I'm seeing a lot of LED light swap-outs and would like to bump this so those of you who have replaced your incandescent bulbs, either headlights, taillights, running lights, interior, wherever, if they work, can you please post the product and link here?
I believe more and more people are going to be doing these mod's in the future so those who post their info, it would be very appreciated.+
Thanks to all of you!! 👍 :cheers:
Click to expand...
Sounds good. I can add a portion of the thread at the top with part numbers and links of the ones that work with the GX 460 if people are willing to share them in the comments below or DM them to me.
 
  • Like
Reactions: r2m
Thanks TX GX460!
 
TX GX460 said:
This is an attempt to put together a cohesive list of build products that work for the GX 460, preferably ones that are made for the GX 460 specifically and not generic items like tires or lights. This will be a continual project for me, and if you would like to comment with ideas I will add information accordingly. Please provide part numbers or a link if you have them for any suggestions. I am starting with basic links only at first but will add more information over time. This thread will only be items that have been confirmed work with the GX460 platform, not ones that might work. I will be listing products by manufacturer, not supplier (unless they are the same), but if you have installation instructions in a thread or link I can try to add that. Approved IH8MUD vendors are also welcome to post in the comments with product information and links. If products are generation-specific I will indicate that where possible. For your reference, 1st Gen is 2010-2013, and 2nd Gen is 2014-2019. Everything will be in the order in which I add them, not in order of preference.

List of Build Threads:
And a special shout-out to the awesome 2nd Gen Prado build by Ozdefunk - Builds - New Build 2020 Toyota Prado

Front Bumpers:
1st Gen:

2nd Gen:

Rear Bumpers:

Recovery Points:
Click to expand...
Aftermarket factory sized interior switches.

Toyota Small Push Series Archives - CH4X4 Industries

www.ch4x4.com www.ch4x4.com
Maybe TX GX450 may want to put it up higher on the original post so it can be found easier?
 
  • Like
Reactions: r2m
TX GX460 said:
This is an attempt to put together a cohesive list of build products that work for the GX 460, preferably ones that are made for the GX 460 specifically and not generic items like tires or lights. This will be a continual project for me, and if you would like to comment with ideas I will add information accordingly. Please provide part numbers or a link if you have them for any suggestions. I am starting with basic links only at first but will add more information over time. This thread will only be items that have been confirmed work with the GX460 platform, not ones that might work. I will be listing products by manufacturer, not supplier (unless they are the same), but if you have installation instructions in a thread or link I can try to add that. Approved IH8MUD vendors are also welcome to post in the comments with product information and links. If products are generation-specific I will indicate that where possible. For your reference, 1st Gen is 2010-2013, and 2nd Gen is 2014-2019. Everything will be in the order in which I add them, not in order of preference.

List of Build Threads:
And a special shout-out to the awesome 2nd Gen Prado build by Ozdefunk - Builds - New Build 2020 Toyota Prado

Front Bumpers:
1st Gen:

2nd Gen:

Rear Bumpers:

Recovery Points:
Click to expand...
Is there a similar summary for the GX470?
 
Can’t find a OEM plastic tubbed radiator. For a little more than aftermarket plastic replacement and a lot cheaper than OEM . These guys will build a aluminum radiator for you


1638481123214.png
 
Anybody here use bison gear molle panels? Skipping rago because never been a fan of there customer service. New to this gx 460 community, coming from a 5th trd pro.
 
No experience myself but
Notcris said:
Anybody here use bison gear molle panels? Skipping rago because never been a fan of there customer service. New to this gx 460 community, coming from a 5th trd pro.
Click to expand...

I've seen a number of posts on the GX facebook groups saying the Bison Gear is great quality and they were impressed by the quick shipping coming from Poland.
 
Notcris said:
Anybody here use bison gear molle panels? Skipping rago because never been a fan of there customer service. New to this gx 460 community, coming from a 5th trd pro.
Click to expand...
Mine are Victory and they work great. Easy install, clean, clear YouTube for installs.
I have both rear quarter panels and the rear shelf.
You can see it here, starting at post # 210: Builds - R2M 2013 GX460 Overland Build - https://forum.ih8mud.com/threads/r2m-2013-gx460-overland-build.1104719/page-11
 
Notcris said:
They look great too,victory is about 700 with shelf. These were 380 shipped w shelf 🙌 any other easy interior mods to do?
Click to expand...
A different center console cubby tray and a glove box organizer:
forum.ih8mud.com

Builds - R²M 2013 GX 460 Overland Build

-SOLD- Now I have my old Metaltech sliders lying around. Hummm, what to do... Does anyone have a hundred dollar bill they don't know what to do with? I have all the fasteners! Other than some scrapes (review photos), they are in perfect condition and ready for mounting. They are dirty, but a...
forum.ih8mud.com forum.ih8mud.com
forum.ih8mud.com

Builds - R²M 2013 GX 460 Overland Build

-SOLD- Now I have my old Metaltech sliders lying around. Hummm, what to do... Does anyone have a hundred dollar bill they don't know what to do with? I have all the fasteners! Other than some scrapes (review photos), they are in perfect condition and ready for mounting. They are dirty, but a...
forum.ih8mud.com forum.ih8mud.com

I forget, but you may need to use a heat gun, just a wee bit to get the console tray to fit better. But it works great!
 
You must log in or register to reply here.

Similar threads

C
2020 GX460 Build Recommendations
Replies
9
Views
706
citadel1n0
C
D
Purchase help – 2015 GX 460 luxury with 240k miles
Replies
7
Views
272
r2m
r2m
J
GX 460 or LC 200
2 3 4
Replies
60
Views
5K
r2m
r2m
johns94cruiser
New to me 460
2
Replies
21
Views
2K
johns94cruiser
johns94cruiser

Users who are viewing this thread

Total: 3 (members: 0, guests: 3)

Share this page

Back
Top Bottom