Builds Benjamin’s 3D Prints Build (6 Viewers)
- Thread starter BenCC
- Start date
-
- Tags
- build build thread
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
awesomeissquid
SILVER Star
Not sure on a smaller Toyota switch but I would assume there is some automotive switch standard that they are designed around.
Switch Type | carlingtech.com - https://www.carlingtech.com/switch-type#3
Assuming the existing switch are the full size rocker switch. Maybe some miniature or subminiature would fit better?
Not a bad idea, but not an easy change for the RHD 100's - the square blank is LHS of the steering wheel and the Mirror switch is RHS of the steering wheel!Can fit three Toyota switches in the rectangular plate. And move the mirror control to the blank square plate.
Who sent me this switch?
Can fit three Toyota switches in the rectangular plate. And move the mirror control to the blank square plate.
Who sent me this switch?
Yep, I'd buy that. I'm assuming that is the standard size for Carling switches as well?
Good to know.
Is there a good source for the Toyota switches with different text/graphics?
BenCC
Supporting Vendor
- Thread starter
- #2,547
Wired an Apple Express (a WiFi router with airplay) to the truck. The Express functions as a bridge between my phone and the factory amp. Can connect to cellular and the Express WiFi at the same time.
You can stream lossless Apple Music, YouTube, or any online music/videos.
Apple Express uses 3.3V. I put a bulk converter inside the Express stepping down 12-15V to 3.3V.
Need to tug everything behind the console.
This is all I needed from a head unit. The Express does it all, streaming.
Last edited:
Thanks! I never even thought to check Amazon.
Yes... Even with custom text and graphics. Let me go get the URL.
Here's the link. You can design your own switch design and provide text.
www.ch4x4.com
I ordered the Front Diff Lock switch. The switch lights up with headlights on and gets brighter when engaged. I like it because its a push toggle.
CH4X4 Custom Laser-Etched Push Switches for Toyota
CH4X4 Custom Laser-Etched Push Switches for Toyota is a single throw ON - OFF switch designed to operate your 12 volt accessories or devices.
www.ch4x4.com
I ordered the Front Diff Lock switch. The switch lights up with headlights on and gets brighter when engaged. I like it because its a push toggle.
I've ordered a few through this site.
www.aironboard.com
Their "Light green" LED's are a great match for the OEM lighting. They have either Horizontal or Vertical printed switches. For some reason the Horizontal switches are only showing on their Australian store??
www.aironboard.com
www.aironboard.com.au
AIR ON BOARD (AOB) - Toyota Push Switches - Switches - Products
Air On Board is a professional designer of vehicle air systems, switches, recovery gears, panels, tanks, diff breather kits and many other more accessories specializing to the 4WD and trade markets for over one decade
www.aironboard.com
Their "Light green" LED's are a great match for the OEM lighting. They have either Horizontal or Vertical printed switches. For some reason the Horizontal switches are only showing on their Australian store??
FOG LIGHTS 817NG Push switch 12volt Toyota OEM Replacement NEW GREEN
12 Volt 3amp ON-OFF Toyota OEM Replacement Push Switch with LED light green light for FJ Cruiser, Highlander, Tacoma, 4Runner, Tundra, LandCruiser Base LandCruiser 100s
www.aironboard.com
Toyota Push Switches - AIR ON BOARD (AOB)
Push button Switches that fit directly in Toyota Landcruiser Prado, FJ Cruiser, Hilux, Rav4, HiAce, Camry, Corolla; ON-OFF / Momentary / ON-OFF-ON types available.
www.aironboard.com.au
On an unrelated note, where did you get the hi/lo range shifter knob from?
BenCC
Supporting Vendor
- Thread starter
- #2,554
Shift Knobs
www.ellisprecision.ca
In for that switch plate and mirror control relocation whenever they're available, that would be perfect for me.
BenCC
Supporting Vendor
- Thread starter
- #2,557
Tested the three-switch mount. The rectangular hole is a few millimeters short for three switches. Too bad it cannot be fully recessed.
This is one of the configurations. Planned to have
1. 1V2H (V: Vertical, H: Horozonral)
2. 3V
3. 2V (recessed)
Let me know what you think.
Too bad that you can't fit three recessed. I'd go for the 2V version. What's the spacing look like with two switch slots?
awesomeissquid
SILVER Star
I assume since the small toyota switches are wider it would be even worse off?
CH4x4 Toyota Small Push Switch Sasquatch Lights Symbol - https://www.ch4x4.com/product/ch4x4-custom-laser-etched-toyota-small-push-switches/
Would the 2V recessed have enough space for the little LX folding mirror button?
