74HogGuy
Lifetime Rookie
I'm looking to install a FJ80 power steering box into my 40 and coming up short on which Borgeson u-joint I need to connect from the box to the collapsible shaft. I found this below for 60 series boxes and was wondering if anyone knew if they are the same spline size.
"The input shaft on a 60 steering box is 17.5mm x 36 splines. Borgeson doesn't offer offer u-joints in this size, but a 11/16 - 36 u-joint (.001 smaller) which is a stock item from them will fit without problem. "
Thanks!
"The input shaft on a 60 steering box is 17.5mm x 36 splines. Borgeson doesn't offer offer u-joints in this size, but a 11/16 - 36 u-joint (.001 smaller) which is a stock item from them will fit without problem. "
Thanks!