I'm looking for a clean, mostly stock 74 or newer 40 in So.Cal. I would also consider a non-rusty 74 or 75 rig from another state. Many thanks.
Other Vehicles
Classifieds: Jeep, Land Rover, Chevrolet, Ford, Dodge, Nissan, etc
Filter by prefix:
.
Filters
Saw this on the local craigslist site....
http://austin.craigslist.org/car/54058926.html
Well, just bought this and another has come my way. Need to make room.
Excellent cruiser (minus the wheels) if you like stock rides. No hard top. Clutch will be an easy fix. Runs and rides excellent.
Located in Georgetown, KY (right by Lexington).
Looking for 7500.00
Thanks.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4516736122&category=6443&sspagename=WDVW
JL
No affiliation but a reputable guy-sounds like a good rig
http://yotatech.com/showthread.php?t=48345
Looking for a 1975 to 82 fj40 located near Houston Texas. Id like for the cruiser to be used for a daily driver.
Dodge 24V Cumming Turbo Diesel 2500
5spd
Quad Cab
8ft Bed
118,000 miles
Lift Pump (replaced with Cummings PN and pig tail)
Stainless 4in exhaust(Jegs)
Thule Xsporter rack(latters, ply wood, boats, bike carriers ect).
Napa fleet oil and filters used about every 4K, Fuel filster about every 8K
Truck Needs tires which I may or maynot put on depending on how fast the truck sells
Has a rebuilt title. Truck was stolen and they took the vin ## off the dash so CT reissued the title.
I have put 23K on the truck since I bought it last January. Recent 2K mile trip from CT to NC and back pulling a trailer and car with no problems!
I don’t want to sell the truck but I have a company truck now and would like to not have...
I have two sets of tan leather third rows seats for sale that came out of an '98 Land Cruiser and a '98 LX470. Both of sets of seats are in excellent condition, have all the hardware for mounting and seat belts (if needed).
Taking offers.
Buyer pays for shipping.
Pics will be available tomorrow for email.
I'm located in Houston, TX.
Best Regards,
Jimmy Hickok
hickoksv@pdq.net
As subject says, needs to be 4cyl and 5spd and 4WD :) And close to AZ. Doubt I'll find it, but it's worth a try!
:cheers:
I still have 15 days on my Autocheck acct. So if anyone wants a Vin chk just PM me.
Basically a turn-key driver/wheeler. I’ve only wheeled it a few times. It’s mostly just been sitting in my garage.
I now have other expenses that need to be addressed before I worry about having a wheeling rig.
I'm asking $8500. Not interested in trades.
1985 Toyota 4Runner
22RE fuel-injected 4-cyl engine (approx 75k on rebuild according to the maintenance records)
Air Conditioning
Toyota 5-speed trans
Single t-case with 4.10 gears, completely rebuilt
Bud Built transfer case cross member
Rear axle – Ford 9 inch (’78 Lincoln), 63” wide, 33 spline Currie axle shafts, full spool. Setup by Gearman at River City Differential. Disc brakes.
High Angle driveline adaptor yoke to Toyota driveline. 542 gears
Rear driveline – CV...
1985 EFI Solid Axle Xtra Cab mini truck. - $2200 OBO
This is a good start for a trail vehicle. It is ugly, but runs and drives. Miles unknown, but we put a used motor in that we resealed and changed the timing belt.
Already has hi-steer on the front.
I'd like to sell/trade my truck to get something with 4 doors. I had a trade worked out recently and it fell through:( Will consider trade or partial trade for FZJ80 Landcruiser (depending on respective values).
46,000 mi. Black paint and flares, Grey cloth interior. 4x4 with TRD pkg (rear e-locker). 3.4v6. 5spd manual. KING 2.5 adjustable coilovers in front and 1.5 AAL (add-a-leaf) and 5100 bilsteins in rear (stock TRD coilovers included). 4.11 gears. 265 70r16 (metric 31) BFG ATKO's with 5,000 mi. SS brake lines. Minor scatches. Has been off road but never jumped or beaten on. Square tube rock sliders. Rhino Liner in bed. Cobra 75 CB. Aluminum bed box included if you want it.
Kelley Blue Book for this truck in...
Thought I'd give my nephew a hand, he's selling his 40. It's got a hard top, was a daily work rig, not sure what all was done to it but it's got a busted burfield(?) so it's not drivable right now. Could stand a carb rebuild too. I think he's asking $1400 as it sits. Let me know if there's anyone in the neighborhood interested, I can forward the info.
koehler@charter.net
I posted in the wrong section :whoops:
For those that missed it over in for sale see Click here for post
$1000
i was screwing around on ebay and wanted badly to buy this cruiser, but the funds aren't there. anyway-i was the top bidder at 11,100, which did not meet the reserve. he did, however, send me a second chance offer at 12,200, which i think is a steal for a 94 with diff locks and 81k original miles. if interested pm me and we'll see what we can work out.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4512728452&rd=1&sspagename=STRK%3AMEWA%3AIT
I just joined and hope this is the right place to ask this.
I am thinking about getting an LC and found a '93 for $9900 w/115K miles. I am familiar with cars (not LC's unfortunately) and can wrench on a vehicle ok. But I haven't seen it in person yet; I thought i might go look at it tomorrow--its at a used car lot. It has the regular options--moonroof, a/c running boards. I have ran a Carfax, for whats that's worth, and it comes out clean. My question is..if it is clean with no damage and looks to be stock..is this a bad price? I'm thinking it will sell for $8-8500. Is this high? BTW..it's green. I saw that commented on here that all the LC's for sale are green..lol..this must be true.
What kind of stuff should I look out for? It...
Maybe someone from the west coast bay area might want to look @ this.
http://www.craigslist.org/sfc/car/53173804.html
I know I am not alone, but I am searching for a stock, well cared for truck. I am in coastal VA but not afraid to travel for the right vehicle.
Thanks for any assistance.
Mark
I have a 1976 FJ 40 for sale. I tried starting it with no luck, last ran in October before it got cold. It is rusty and mostly stock with a 2F engine and a 4 speed transmission. I'm located just East of Wisconsin Rapids and would like $500. I do have some extra pieces/ parts that I would sell with it if interested. I need to sell before I move in February.
The 73 is running, needs brake line replaced and the driver right wheel brake is engaged. It is mostly stock with a new header and exhaust. I have the stock equipment. Newer tires, frame is poor from rear axle back. Missing skid plate and splash guards. some bad rust in lower areas. I'm asking $700 and need to sell.
Both for $1100. Extra parts included.
email to...
If you have a FJ/BJ 40/42 and live in southwestern ontario. I prefer a Bj but will look at all of them
gerrit74@kwic.com
1988 Mazda RX-7 GSL. Clean and clear WI title. Car is originally from Georgia, so there is no MIDWEST rust or rot. Car is pretty solid all around, but the body is dented and banged up as seen in the pics. Rear of the car by the taillight was the worst. The car did run and drive excellent. Disk brakes all around. 13b rotary fuel injected engine/5 speed tranny. Cruise/ac/power windows/moonroof. 161000 miles on the vehicle. 25mpg, rear wheel drive. Some things that it will need are 1. tires, the tires on it are about 25%. 2. The clutch slave cylinder slowly leaks and it will require a new one. (requires the driver to fill it 1 every 2/3 weeks of daily driving) 3. The radio does not get FM or AM. Tapes do work fine. Car would work excellent...
I am looking for a fj40 that runs. I dont care about body condition. I am looking to pay around 1000 for it. I need something around North Carolina. Please help me in any way. :D :D :D :D :D :D :D :mad: :mad:
Looking for an FJ-60 in Ontario Canada. Preferably in good enough shape to pass safety. Looking for moderately priced truck, have a very fast 87 supra turbo 5sd up for trade if anyone is interested and truck is in good shape.
Just checking the board to see if anyone would be interested in my 71 FJ40. I know it depends on price and condition which I will list here. As I said, It's a 71 model with the usual rust, but not too bad. I was gonna use this as a pleasure rig and dont have the time or funds to finish it. I dropped in a rebuilt sbc 350, it has a new accel HEI coil pack, new wires, new hi flo water pump (not installed) new bumper, new shocks, add a leaf (not installed) extra set of 31" michelin tires, mini truck brake parts for conversion and probably more parts but cant think of them right now. The sbc conversion is installed with the help of AA adapters and bolted to the stock 3 spd tranny and xfer case. The motor and adapter setup alone is over a...
