Other Vehicles

Classifieds: Jeep, Land Rover, Chevrolet, Ford, Dodge, Nissan, etc

Filter by prefix:

1994 Land Cruiser Dark Emerald Pearl w Factory Options Alloy Wheels, Locking Diffs w ABS, Grey Leather Power seats, Privacy Glass, Power tilt/slide glass moonroof, gold package, burlwood dash. My brother bought this new, I got it 6 years ago. 152K miles. No offroad. It just passed complete NJ State Inspection in December, even with the problem listed below. Here are the problems, one biggie: I determined it has a blown Head Gasket. we are losing antifreeze thru the tailpipe. The oil and Trans fluid look clean. It runs rough at idle for a few minutes, then clears up. We are driving the car a few miles per week. Check Engine light is ON, and oil light comes on at some times (seems to be a known issue). There is a crease in rear...
Deuce and a half. 2.5 ton, whatever you want to call it. Drove it home from Texas last summer 1100 miles. Ran 55 the whole way. 300 feet of 1/2 cable on the winch. Turbo diesel, air brakes, pump is turned up a teeny tiny bit. Runs out nice. Just hauled 8k pounds of cast iron to the recycler at 55 mph. The ultimate acreage pickup. Fresh oil, filters, brakes, etc. Tires are good, new top and seat covers. No rust. 6900 obo. I need to move out some toys...
Don't know if they still have it, but these guys had a red '96 factory locked 80 w/ tan interior w/ 130K miles. Asking price was $8,950. I saw it when I picked up my black '96 80 from these guys and it looked in pretty decent shape. http://www.autoselectofkentucky.com/ They're near Lexington, KY.
Hello All, I've been looking for leather car seat covers, and I was interested in knowing if any of you had come across any seat cover from www.trimcar.com ? It looks good I think - but I'd like to hear if anyone else has tried it? :confused: The link : http://www.trimcar.com thanks, Wil
Get your 40s, Get em while they're hot!!  65, 74, 76 and 1979 FJ40s for sale or trade
Well, me and my business partner have four FJ40s and we honestly just like driving the FZJ80s more so we're going to offer these up for sale.. Here is what we have and the specs/prices: 1965, I would assume Ball and Claw front end but I'll include a set of 69 birfield axels with this rig. It has a 305 sbc, stock transfer and trans with 3 on the floor. Brand new 31" ATs, custom roll cage with the harnesses and diamond plate top, HEI distributor, 2.5" Skyjacker, Electric fan, Full power 190E seats, 100% RUST FREE (diamond plate is there cause the wheel wells were cut out for larger tires). This is going to be a super crazy low price of $3,300 only cause I need the money for another project.. 1974, This is a crazy nice 40! It's...
I'm posting this for a buddy in Santa Fe, New Mexico. Gary can be emailed at gbell@Grasslands.com. If you reply here I will help you as best I can, but it's best to deal with the owner of the truck. He is taking offers. Gary is the original owner. The truck was purchased in California and he moved to New Mexico in 1996. 84 extra cab Deluxe, 5-speed, 22R, carburated. 217,000 miles, needs a little work (exhaust leak and alternator). Trans has about 70,000 miles on it. New starter, Front drive shaft has about 40,000 miles on it. AC (needs servicing), AMFM cassette, manual hubs, sunroof. Paint faded and a few rust spots, otherwise sound.
1989 4runner that has a fresh solid axle swap done to it. I got all the components from All-Pro in Hemet. If you know anything about All-Pro, then you know this thing will flex. I just finished it a little over a year ago. However, I decided to go back to school and don't drive it anymore. It's parked and sitting in Escondido, CA. I have had it out only one time since doing the conversion and I can say that this rig really flexes. What it has: 22RE F.I. Downey Header K&N air filter New top end (about 2yrs) All-Pro springs front/back- 5" of lift New front rotors FJ40 type w/brakes Hysteer crossover steering R axle cut/turned New spring perches-Rear Biltsein long-travel shocks BFG 33x12.5x15 MT's 15x8 Rockcrawlers Alarm...
1995 Landcruiser w/lockers Magnolia/Houston Texas Another update 1-4-06 Cruiser parts.net didn't ship the rearend for whatever reason so I am currently having the rear end 3rd member rebuilt with genuine toyota parts new ring and pinion, bearings and seals. 1700.00 and I will have all the receipts. It will be done in 5 days so now it is sellable and good to go. Sorry for all the changes. I was supposed to call one gentleman back rayray??? but I accidentally deleted your PM so call me if you are still interested. Thanks Update 12-26-05: I just bought a complete rear axle assy. to replace the whining one. I paid 1200.00 and it has a 90 day warranty. It's being shipped and I should have it in a few days so if anyone is still interested...
1994 Blazer/Tahoe 2 Door with $5,000+ Chameleon Paint..  Trade for?
I have a STUNNING 1994 Chevy Blazer (same as the Tahoe they changed the name the next year) that I'm looking to trade for any of the following: ANY LAND CRUISER of course... Car, Truck, SUV, Van, Motorhome, Rock Crawler, Camper or Sandrail.. Boat or Jet Ski.. Quad or Dirtbike.. Coins, Jewelery, Diamonds, Gold, Silver or Platinum.. Property, Mobile Home, Tools, Tractor, Air Compressor, Fish Tank, Television, Computer, Stucco work, Cement work or just about anything else you can think of. I'll trade for any combination of the above as well.. Here's the rundown on the Truck: New motor and Trans. less then 25k ago.. New 2004 Tahoe Rims and Tires.. New Windshield.. New Fuel Pump.. New Battery.. New MP3 Player...
For Sale: 1995 T100 single cab long bed Original Owner, non smoker, no wrecks of any kind located in Ventura, Cal. I'll get some pictures soon. It's my dads truck, he bought it new and has only used it for work. Tires are in great shape and it runs like a top still. The bed is pretty scratched up and has a few dents in it from use, hauling steel mold inserts and aluminum, but the shocks and springs are still great. Cloth interior Overdrive (automatic) extra factory stereo from another 4 Runner he never put in alloy wheels A/C slider window not power windows or locks 2 wheel drive Great truck. pm me if you want more details
1982 Fj-60 Exterior: Tan Interior: cloth yellow stripe Son's car, maintained by LC mechanic What is good: Solid truck with: Headers - de-smogged New brakes-front rotors and pads New OEM carb - actually has about 2500 miles on it. 2 1/2" OME lift 10" Black Rock Crawlers Pro-Comp 33 x 12.50 decent tread After market Panansonic CD palyer New Window Tint New dash cover All seals front axles replaced 3200 miles ago new starter-gear reduction New radiator 260 K miles - just broken in Replaced tach - OEM ARB front bumber - non winch, 8 mo. old Re-upholstered front seats All new hoses Not so good: Needs headliner two minor rust spots above each rear wheel well, size of a dime lower door kick panels need carpet...
I don't know why this is important, but the title says, "1994 Fj-z80 first sold in 1995." I haven't been able to find out the subtle differences, but it has things like abs DISC brakes front and rear rather than the shoes in the back. It doesn't have airbags, so the best I can describe it is a 94/95 mix. No lockers, 171k miles, born and raised in southern California still with good paint. It's got the ARB bumber that can mount a wench, and brand new (less than 2k miles) BFG 305/70 R16's. Leather interior with some wear in the driver seat.... he didn't carry to many passengers, so the rest of the car is in great shape. Car is in great condition, no knocks, pings or anything. This is my sons cruiser and he is moving to Hawaii in a...
Trying this here before I decide to keep it and do the remaining work myself... $3000 Truck is in Atlanta, GA 1985 4Runner, 5spd, A/C. YJ Fronts, OME HD Rears with 1.5" longer shackles f/r, 9000s on all corners on stock mounts, vented rotor swap, ext braided lines, 15x10 wearing mtrs(50%), new OE rear drum cylinders, comes with OE master/slave clutch cylinders to install(old master leaks), there is a small dent on the hood from a falling branch, otherwise the body is in perfect shape, rear corner bumper torn off but no damage to body(see pic). The 22RE is blown. The motor is torn down to the block, still attached to the tranny in the bay. The head has been cleaned, vacuum tested, and decked - checked out okay. I don't have...
Another update 1-4-06 Cruiser parts.net didn't ship the rearend for whatever reason so I am currently having the rear end 3rd member rebuilt with genuine toyota parts new ring and pinion, bearings and seals. 1700.00 and I will have all the receipts. It will be done in 5 days so now it is sellable and good to go. Sorry for all the changes. I was supposed to call one gentleman back rayray??? but I accidentally deleted your PM so call me if you are still interested. Thanks Update 12-26-05: I just bought a complete rear axle assy. to replace the whining one. I paid 1200.00 and it has a 90 day warranty. It's being shipped and I should have it in a few days so if anyone is still interested let me know. I'll even throw in the old rearend...

Thread Filter

Latest posts

Back
Top Bottom