Selling this turn key and go 1979 FJ40 to make room for another new project. I purchased this unmolested 40 a little over 2years ago as a 3rd owner with no intention of selling it so some of the OCD came out in my restoration/modification. I wanted to have a nice 40 that I could drive reliability day in and out if needed but not make it too nice to take off road when I wanted to. However I’ve just got too many other projects and don’t have the room for this one right now. I have gone through just about everything mechanical on it and tried to leave as stock as possible with some very minor modifications. I’ve listed some of the major items that I have gone through or replaced that I think are relevant and can remember. All items...
FJ40 | BJ40
Classifieds: Toyota 40-series Land Cruiser
Filter by prefix:
.
Filters
Apologies if this has already been posted here. I'm sure the price will get bid way up as always on BaT. Still interesting to look at
https://bringatrailer.com/listing/1971-toyota-land-cruiser-fj40-36/
Looking for a mid 70’s FJ40 to improve as a hobby and use as my daily driver.
I have found a decent looking FJ with a 1969 Frame and Motor but a 1974 Body. No rust, runs and drives, no doors, or top. Is this a good value around 10k or should i
pic included below.
Runs and drives
Little rusty underneath
7,000 obo
Text 563-543-1724 for more info
No affiliation. I have not even called the number. Sitting out front at Auto repair shop in town.
Good frame, has surface rust and could use a cleanup, but no rot, no holes. Comes as seen. Ran when parked. $1,000
Looking to get back into another 40. Prefer running project or nearly running, rust not an issue but prefer at least a solid frame. Show me what you have in the 5k range if that still exists. Located in Virginia Beach.
thanks!!!
It is time to sell my 5/73 Toyota Land Cruiser FJ40. The body is straight, and the only rust is in the rear sill and a half inch hole where the factory fuel tank used to be. The rear quarters are comp cut and the front fenders have been cut as well. It has a Kayline soft top and BestTop 2-piece doors that do not leak.
The engine is a Chevy 350 4 bolt main with Holly Pro-Jection and a thumper cam. Transmission is a SM420 mated to a 203 low range box to a Land Cruiser “3-spd” transfer case. Front axle is a built Toyota 8” with 5.29 gears, no-slip locker, 30-spline RCV axle shafts with 300m inners, 300m hub gears, and high steer. Rear axle is Toyota 9.5” semi-float with 5.29 gears and a LocRite locker. Tires are 36” radial Iroks...
Vehicle is parked at my weekend place in Delray, WV (26714)
$4.5k or best offer. I know these vehicles cherried out sell for over $40k, sometimes over $50k.
This was my daily driver until I parked it 15 years ago. New plugs, wires, battery, air filter and starting fluid and it started right up. Chevy 350 engine connected to three speed Toyota transmission.
Because it sat so long, it is currently not road worthy. It starts, runs, drives, but brakes aren’t that good. Nothing is power (steering, brakes, etc.). It lived most of its life in Southern California but corrosion is present. Common area along back above bumper, and both wheel wells are showing some corrosion. Also just noticed that the driver floor pan is starting to rust...
I am moving back to Canada and selling my fun mountain truck - a patina Rustic green 1974 FJ40 with an LS conversion built by Bsquared from this forum. I'm the 2nd owner since the restoration project, and in the last 3 years I've put only a few hundred miles on the thing. It sits at my place in Big Bear Lake California, garage stored, with basically 0% humidity.
The build was well documented in this thread.
Project Duragoat: My 1974 FJ40 Build Thread
Here are some photos from when I bought it.
https://photos.app.goo.gl/P2Xb7O0cvyCW42Ob2
It's the same now, though I have rear folding seats in there instead of the storage box.
I'm looking for $20k - and would much prefer so sell to someone on this forum. Please PM if interested...
I am located near Richmond Va
Dana
804-296-4000
Part Found Thanks Mud
If you are out there and ready to part with your vehicle, I am ready to buy. PM me if you are ready to sell or if you know someone who might. I really don't care to here comments about how impossible it is to find. They are out there. If you don't ask, you don't get.
I’m posting this for a buddy that’s not on here. I’ve seen this rig in person. And, I’m willing to take detailed photos or video if requested.
The story I remember is that my buddy bought this around decade ago from a helo pilot on Ft Rucker. The PO replaced the tub. Not sure if it is OEM or another brand. It is solid though. I did not see any rust through. It has the original 2F with 4 speed. I’ve seen him drive it all over and even up to Troy AL which is over 50 miles rounds trip.
I think with a little buffing and some new tires, you’d have a later model, solid 40.
His name is John. Tell him Daniel have you his number. 334-470-0416
I bought some parts from this gentleman a few weeks ago and we have been talking cruisers ever since. Super nice guy and a straight shooter. Thought I would help him spread the word because he is not registered on MUD. He has his 65 FJ40 for sale with Idaho Classic Cars, link below. Super nice!
https://www.idahoclassicscars.com/details/used-1965-toyota-fj-cruiser/66379839
How much is this Fj-40 worth?
https://losangeles.craigslist.org/sfv/for/d/burbank-1971-toyota-landcruiser-fj40/7154696575.html
Evening everyone.
This is posted only here. Not on ebay, etc. yet.
I have a '80 FJ40 that needs a new home. Also have 2 more (78 blue ragtop /68 black matte HT) 40s and a couple nice FJ43s in Denver. This is a very original truck, and after a bad experience w/ a body shop down here, I've decided to either find her a new home or possibly part her out due to the shipping costs. Tho, I'd rather keep her intact in a new garage if possible.
Runs fine and has no leaks. The metal and frame are VERY good w/ some minor surface rust.
Needs: one back glass, drivers seat, one side back slider, upholstery, gaskets, wipers, badges, etc. (see photos)
Has: driver side step, one back glass, spare rack, and both front door skins.
The rub...
articsilber323
New Member
Messages3
Molly is for Sale. If you or know someone looking for a super reliable Meticulously maintained trail bouncer she is a good one for sure.
Priced at $30,000
Parts list: Partly 1979 Toyota FJ with custom cage and tube work custom fuel cell, panel work,
Nicest new Coreabu seats,
LEDs all around,
aluminum top.
Molly has been wheeled not a show queen but well taken care of.
Parts list:
LS 5.3 Texas speed custom cam,valve springs, heavy head work, brass trunion kit, deatschwerks injectors, oil cooler,Accusump, hugger headers. Runs really strong... (no I’m not claiming 500hp)
Holley terminator X stand alone ecu with Wideband and 3.5” digital screen
Well Built turbo 400 with remote fan cooler
PTC converter...
If you have one for sale in Alberta or near by in Canada. Let me know what you have, some details on your rig and pictures and price.
Hey yall, selling a 3 owner 181,xxx mile mustard yellow 40. I bought this car about a year ago and I am now ready to let go so I can get a more practical car for college (aka another Land Cruiser would love a locked 80). $16,500
Original engine and paint, has some sort of aftermarket mirrors, LED headlights, CB radio antenna, Weber carb, rear jump seats in good condition, front seats have a few holes, mostly surface rust from what I can tell but has two spots where rust has eaten through on rear quarter panels, missing headliner, also had a aux gas tank added by previous owner but it has never worked for me (think its something with the pump not working), some sort of aftermarket suspension, and two added gages for volts and Vac. I...
1968 FJ40 project. Tub has been patched, but is solid. Inside of tub and engine bay has been sprayed with bed liner. Has small block Chevy V8 mated to Land Cruiser 3-speed transmission/t-case.
Parts that come with it are new Holley carburetor, new air cleaner, new plug wires, new motor mounts, new poly body mounts, lights, trim pieces, etc.
Clean NC title.
$3500 obo
Up for grabs is this gorgeous FJ40 that was sold to me here on Mud last November. The 40 is the work of @simps80 who lovingly brought it back from the dead and restored it with countless man hours of labor and dedication and I would imagine quite a bit of hard earned $’s.
The entire build from barn find to his sale to me is well documented if you are prepared to read all 21 pages of his build.
www.risingsun4x4club.org/forum2/showthread.php?t=17429
I believe there was also a build thread here on a Mud but I have not been able to dig it up.
Rather than me blabber on about how awesome this Cruiser is, I’ll let the build details do the talking. I also have over 500 pictures to share with interested parties.
Unfortunately, this Cruiser...
Wanted: 1981-1983 FJ40 US Spec. Preference for mostly stock survivor.
https://lasvegas.craigslist.org/cto/d/las-vegas-78-fj40-with-new-old-man-emu/7151300216.html
This is one of mine, affiliated
No affiliation just passing along, $10500:
https://losangeles.craigslist.org/sfv/cto/d/north-hollywood-1970-toyota-land-cruiser/7149014004.html
Thread Filter
Latest posts
-
LX470 question... Has anyone ever removed the yellow egg yolk turn signal caps in the rear lights? (7 Viewers)- Latest: WannaCruise
-
-
-
-
-
-
-
-
-
-
-
-
-
-