Builds Work In Progress aka: Badass (2 Viewers)

[Prairie Swamp]

Last cycle says 600 degrees, honestly not even sure my oven goes that high so I'm gonna risk not doing the third baking.

A self cleaning cycle goes about that high - but even I wouldn't do it for several reasons. It will finish curing in use.

Yes a piece of glass sheet is perfect to roll it on. If you only need one 2F pushrod I'm pretty sure someone on Mud can help you out.

 

[Jaric00n]

ugh
stop reading my mind

glass is a good idea for rolling them....

could make some cookies too

lolz

 

[NeverGiveUpYota]

Ah damn all you seasoned owners. It's bent.

 

[Jaric00n]

~dances around the bent pushrod~

check the others.......

 

[Prairie Swamp]

Good news is you found it. Even gooder news - no way that cylinder was ever going to perform correctly with a bent pushrod. So look at it as a win.

 

[NeverGiveUpYota]

Took a min or two for the brunette to overstep the blond... rolled them on the corner of the glass. All appear even except that number 4.

 

[Jaric00n]

it will be 1 year in August for ownership of my Lump =3

which is tomorrow

WOOT

 

[Jaric00n]

In Japan, four (四) can be read as "yon" (よん) or "shi" (し). The kanji for death is "shi" (死), which is why the number four is considered unlucky

Sorry, I had to......

 

[NeverGiveUpYota]

In Japan, four (四) can be read as "yon" (よん) or "shi" (し). The kanji for death is "shi" (死), which is why the number four is considered unlucky

Sorry, I had to......

There really is something different about you. Just saying...

 

[White Stripe]

If you call up classic cruisers, they should be able to get you a good used one.

 

[NeverGiveUpYota]

If you call up classic cruisers, they should be able to get you a good used one.

I googled that name and came up with a bike parts supplier. found it... but I'll contact Georg at VH too, he "kinda" owes me a favor.

 

[4Cruisers]

Classic Cruisers, Salida, CO:

Home

 

[NeverGiveUpYota]

Classic Cruisers, Salida, CO:

Home

LM for Georg and put a call into Cruiser Classics too. Will see what either can offer. Thanks guys!

 

[NeverGiveUpYota]

Cheap push rod inspection.

 

[4Cruisers]

The shop that rebuilt the 3FE going into my FJ60 is rebuilding a couple of 2Fs for Classic Cruisers every month, so I'm sure they'll have what you need.

 

[NeverGiveUpYota]

Heads ready! Going to pick her up!

 

[Jaric00n]

post pics ~~~~~

 

[NeverGiveUpYota]

So here she is in all her glory! I tell you I basically stared at it for an hour once I got it in the garage.
$324, basic valve job and head resurfaced. He primed it and replaced the ugly air line plugs as well. The spark plug holes look freshened too. Everything looks amazing.
I added painters tape to all the bare cast surfaces since I will add an enamel but I also might not get to it for a few days since my son is back w/ me now. I'll see about doing the galley plug as I picked up all the supplies the other day too.

 

[NeverGiveUpYota]

The new valves look amazing too Jason @reevesci, thank you!!

 

[NeverGiveUpYota]

Taped up.