Howdy!
100 series in question: 2000 with ~323k miles
Long story short, replaced my TB and water pump summer of 23, while in there thought about replacing the oil pump but it was bone dry. WP Gasket didn’t seat properly, but it was headed to a shop for the dreaded ABS unit, so I had them...
Hey guys,
I have a 97 Land Cruiser w/ the 1FZ-FE. Has had a oil leak thats been slowly getting a bigger leak. I took it to a shop and they said it the oil pump gasket but not the front cover but the one behind the timing cover @ the oil pump..
Is it neccesary to remove the head to r&r the...
I need to have my oil pump seal and valve cover seal replaced (95). The local shops I've spoken to don't want to work on something of this vintage with the complications that might arise, Torfab isn't an option for me. Any recommendations for reputable shops in Seattle or Shoreline would be...
I've owned a few 80's over the years all in great working condition, but this is the first 80 I'm looking at that is not in running condition.
94 Land Cruiser US spec Gas.
-Seller states the ''oil pump went out'' ....Claims he was driving and the temp gauge went up and the oil light came...
I am replacing the oil pan gasket and was wondering if i should change out the oil pump. i do have really low oil pressure at 700 rpm. it does increase with a rev of the engine. like all these 2 f engines. will a new pump help at low idle? thanks
Hey guys, I'm looking for the outlet union for the oil pump on a late 1F/2F (P/N: 90404-16008). I'm in San Jose, CA; if you have one, please PM me and we can talk price and shipping. Thanks!
Hey guys, I took apart the block and found that the union that the oil pump banjo pipe attaches to (block side) was messed up in the past and just left in there loose. The threads are galled, so I'm looking for one but does anybody know what pipe thread it is? Maybe I can order a tap/die from my...
I'm at best parts-changer level as a mechanic, maybe a blonde one past that, but by no means do I have much to brag about. I'm working on it, but it's slow going, so please bear with me.
I also live off in the mountains in Montana, miles down a trail that would qualify as semi-challenging...
Hi, here's context: I'm rebuilding a 5/1973 F engine. Old oil pump is discontinued, so I had to fabricate a new oil pump output line to make the new style oil pump fit. The new custom line fits great into the threaded hole, but there is another threaded hole next to it, and I cannot figure out...
Hi. My natural instinct is yes, I do need a new oil pump. But I have a 5/73 F engine and can no longer get a new oil pump because they're discontinued.
I suppose I could upgrade to a 2F oil pump, but I've heard that I would need to get a 2F oil pan too.
What are my options? Can I just reuse...
I'm having issues whit my oil pressure. After engine/oil warm up everything runs fine and I have decent oil pressure until I stop. While the engine idles the pressure drops and won't rise again until I rev the engine.
I'm looking at replacing the oil pump. Can't I access it by just dropping the...
Hi all,
I'm finishing up rebuilding one engine and going to be doing 2 more. The first is my 1950 Dodge B2 pick up, next is my 1973 FJ40 and then a my 1969 FJ40.
So here is my deal, after rebuild, that FIRST turn over is a big wear down on everything, there is no oil in lot's of the engine. I...
A question for the group-
I'm in the process of pulling my 97 80 series engine apart for a rebuild. Before I pulled the crankshaft out I noticed something that I thought was strange. Once the timing cover is off the crankshaft has (from front to back) a timing chain gear, rotor "gear" read by...
Hey all,
First, lets wish Woody good luck at Hammer '17 tomorrow. There is a entire community wishing he will be victorious.
I am clearing out my garage of all unused parts.
Items are listed with all pictures. As stuff gets sold the details will go away.
Buy pays shipping cost also if needed...
greetings.
I have this B engine 11411-56020 with a broken oil pump.
I am tryng to find the spare part but here in Costa Rica it is almost impossible to find that part and neither on the internet, there I found a very look alike but don´t know if it will fit...
By logic I need an 11301-56020...
Female enthusiast off and on mud since '10 but first cruiser in hand was in 5/'08 thanks to a young guy I was dating who had a wealth of mechanical know how... that truck became my DD in 6/'10 after my little kermit the frog green kia rio threw a piston in her second engine (first went just...